9 Best Replacement Front Wheels for Craftsman Lawn Mowers (November 2026)
The best Craftsman lawn mower front wheels include the TENGMUJX 532403111 194231X427 Front Drive Wheels Fits for common 8-inch Craftsman drive wheels, the Sutmorly 634-05039 Front Drive Wheels Fits Troy-Bilt for 53-tooth 2-inch wheels, and the Grasscape 2 Pack 583719501 194231X460 Front Lawn for 1-3/4-inch replacement wheels.
On this page (7 sections)
- Which Craftsman lawn mower front wheels are the best picks?
- Best Craftsman lawn mower front wheels by use
- What should you measure before buying Craftsman front wheels?
- How do drive gears affect front wheel fit?
- Should you replace one wheel or both?
- How can you tell whether the issue is the wheel or the drive?
- Verdict: Which Craftsman lawn mower front wheels should you choose?
The best Craftsman lawn mower front wheels for many self-propelled walk-behind models are TENGMUJX 532403111 wheels, with an 8-inch diameter, 1/2-inch bore and 53-tooth drive gear. Choose by the mower's full model number and original wheel part number, then compare width and hub dimensions.
This roundup includes several 8-inch drive wheel pairs and two larger riding mower tire assemblies. The right replacement depends on the axle fit and gear, not just the Craftsman name.
If your mower is a walk-behind model, start with the part number printed on the old wheel or shown in its parts diagram. For a riding mower, compare the tire size and hub measurements instead.
Our picks at a glance
-
1
Best for common 8-inch Craftsman drive wheelsTENGMUJX 532403111 194231X427 Front Drive Wheels Fits
9.7/10 our score
See it on Amazon -
2
Best for 53-tooth 2-inch wheelsSutmorly 634-05039 Front Drive Wheels Fits Troy-Bilt
9.6/10 our score
See it on Amazon -
3
Best for 1-3/4-inch replacement wheelsGrasscape 2 Pack 583719501 194231X460 Front Lawn
9.5/10 our score
See it on Amazon
- 4
Check itGICOOL 583719501 194231X460 Front Wheels for Craftsman
Best for a broad Craftsman model list - 5
Check itHLHgirl 15x6.00-6 Lawn Mower Tire Riding Mower
Best for riding mower tire and wheel sets - 6
Check itMakorae 2 Pack 15x6.00-6 Lawn Mower Tire
Best for turf-friendly riding mower tread - 7
Check itCLSR2U 634-05040 8x2 inch Lawn Mower Front
Best for select MTD family mowers - 8
Check itCheeMuii 583719501 Lawn Mower Wheels 2 Pcs
Best for a 53-gear 8-inch pair - 9
Check itGICOOL 581009202 193912X460 Front Wheels for Husqvarna
Best for 193912X460 replacements
Which Craftsman lawn mower front wheels are the best picks?
TENGMUJX is the strongest match for common 8-inch drive wheels, while other choices cover different part numbers or wider wheels. The two 15 x 6.00-6 options are for riding mower applications and should be compared with your current tire assembly.
We compared stated dimensions, replacement numbers, named mower models, tread and drive gear details against the needs of Craftsman front wheel shoppers. Our score weighs specs, features and buyer feedback against what you're shopping for.
| Product | Best for | Diameter | Width | Bore | Our score |
|---|---|---|---|---|---|
| TENGMUJX 532403111 194231X427 Front Drive Wheels Fits | common 8-inch Craftsman drive wheels | 8 in | 1-3/4 in | 1/2 in | 9.7 |
| Sutmorly 634-05039 Front Drive Wheels Fits Troy-Bilt | 53-tooth 2-inch wheels | 8 in | 2 in | 1/2 in | 9.6 |
| Grasscape 2 Pack 583719501 194231X460 Front Lawn | 1-3/4-inch replacement wheels | 8 in | 1-3/4 in | 1/2 in | 9.5 |
| GICOOL 583719501 194231X460 Front Wheels for Craftsman | a broad Craftsman model list | 8 in | 1.75 in | 1/2 in | 9.2 |
| HLHgirl 15x6.00-6 Lawn Mower Tire Riding Mower | riding mower tire and wheel sets | 9.0 | |||
| Makorae 2 Pack 15x6.00-6 Lawn Mower Tire | turf-friendly riding mower tread | 8.8 | |||
| CLSR2U 634-05040 8x2 inch Lawn Mower Front | select MTD family mowers | 8 in | 2 in | 1/2 in | 8.6 |
| CheeMuii 583719501 Lawn Mower Wheels 2 Pcs | a 53-gear 8-inch pair | 8 in | 1-3/4 in | 1/2 in | 8.4 |
| GICOOL 581009202 193912X460 Front Wheels for Husqvarna | 193912X460 replacements | 8 in | 1.75 in | 1/2 in | 8.1 |
Best Craftsman lawn mower front wheels by use
The best replacement is the wheel that matches your mower's part number and axle measurements. Each pick below has a distinct fit or use case, so check the mower model before you order.
TENGMUJX 532403111 194231X427 Front Drive Wheels Fits: Best for common 8-inch Craftsman drive wheels
- 8 in diameter
- 1-3/4 in width
- 1/2 in bore
- 53-tooth drive gear
- 2 wheels
A 2-wheel set with several replacement numbers, including 532403111, 194231X427 and 194231X460. Check your mower model and original part number before ordering.
Pros
- Several common replacement numbers
- Dimensions suit many walk-behind models
- Two wheels in the pack
Cons
- Model compatibility needs checking
- Not intended for riding mower tire assemblies
TENGMUJX is a leading choice when your Craftsman uses the 532403111 or 194231X427 wheel family. The pair measures 8 inches across, 1-3/4 inches wide and has a 1/2-inch bore, with a 1-5/8-inch hub.
Its replacement numbers also include 194231X460, 532194231 and 583719501. The compatibility details name numerous Craftsman 22-inch mower deck models, though your full model number still needs to match.
The 53-tooth drive gear matters on a self-propelled mower because the wheel connects with the drive mechanism. Compare the gear and wheel shape with your old part before installing a new pair.
Pick it when the mower model and part number match this family. If the mower stops pulling after a wheel replacement, the drive system may need attention; our guide to fixing a Toro Personal Pace lawn mower covers a related walk-behind drive issue.
Sutmorly 634-05039 Front Drive Wheels Fits Troy-Bilt: Best for 53-tooth 2-inch wheels
- 8 in diameter
- 2 in width
- 1/2 in bore
- 53-tooth drive gear
- 2 wheels
These wheels replace 634-05039 and several related numbers, with stated compatibility for select Troy-Bilt self-propelled models. Confirm the part number because the 2-inch width differs from narrower wheel options.
Pros
- 53-tooth drive gear
- Two wheels included
- Compatibility list names specific mower models
Cons
- Fit depends on model and OEM number
- Wider than 1-3/4-inch alternatives
Sutmorly is a fit to consider for select Troy-Bilt, MTD and Craftsman models that use 634-05039 or one of its listed related numbers. The 8-inch wheel is 2 inches wide, making it wider than several other choices here.
Its 1/2-inch bore and 53-tooth drive gear make axle and gear checks essential. The named model list includes various TB200 series self-propelled mowers, but the mower model should match before you rely on the fit.
This pair may suit a mower whose original wheel is 2 inches wide. Don't choose it only because the diameter is right, since wheel width and replacement numbers can vary.
Grasscape 2 Pack 583719501 194231X460 Front Lawn: Best for 1-3/4-inch replacement wheels
- 8 in diameter
- 1-3/4 in width
- 1/2 in bore
- 53-tooth drive gear
- 2 wheels
The set replaces numbers such as 583719501, 194231X460 and 532403111. It names several Craftsman model numbers and uses a 53-tooth gear.
Pros
- Common replacement numbers
- Stated fit for many Craftsman models
- Two wheels included
Cons
- Verify model compatibility
- Drive gear requires a matching mower mechanism
Grasscape covers the 583719501 and 194231X460 part family, with a stated fit for many Craftsman and other walk-behind mower models. Each wheel is 8 inches in diameter, 1-3/4 inches wide and uses a 1/2-inch bore.
The 53-tooth gear is intended for front drive wheel applications. Its replacement number list overlaps with TENGMUJX, so compare the actual model and part number rather than choosing based on brand or wheel size alone.
Grasscape names selected self-propelled Craftsman models, including 917370431 and 917370601. Those examples can help narrow the search, but check the complete model number in your mower's manual or parts diagram.
GICOOL 583719501 194231X460 Front Wheels for Craftsman: Best for a broad Craftsman model list
- 8 in diameter
- 1.75 in width
- 1/2 in bore
- 2 wheels
This 2-wheel set lists a wide range of Craftsman models and replacement numbers including 583719501 and 194231X460. Check your exact mower model rather than relying on the brand name alone.
Pros
- Broad model compatibility list
- Several replacement numbers
- Dimensions match many 8-inch walk-behind wheels
Cons
- Compatibility still depends on the exact model
- Drive gear tooth count is not specified in the details
GICOOL names a broad range of Craftsman mower models for this 583719501 replacement family. The pair measures 8 inches in diameter, 1.75 inches wide and has a 1/2-inch bore.
Its replacement numbers include 583719501, 194231X460 and 532403111. That overlap may help if your old wheel carries one of those numbers, though the mower model remains the best fit check.
The listed dimensions match many common walk-behind wheel assemblies, but the drive gear tooth count is not specified here. If your mower is self-propelled, compare the old gear before choosing this pair.
HLHgirl 15x6.00-6 Lawn Mower Tire Riding Mower: Best for riding mower tire and wheel sets
- 15 x 6.00-6 size
- Pre-assembled tire and wheel
- 3/4 in bushings
- 570 lb maximum load
This is a pre-assembled riding mower tire and wheel pair, not a small walk-behind drive wheel. Compare tire size, hub length and bushing size with your existing assembly.
Pros
- Pre-assembled pair
- Tire and wheel included
- Stated 570 lb maximum load
Cons
- Only fits when the riding mower dimensions match
- Different application from walk-behind drive wheels
HLHgirl is for a riding mower with a matching 15 x 6.00-6 tire size, not a small walk-behind front drive wheel. The pre-assembled pair has a 6-inch rim, about a 3-inch hub and 3/4-inch bushings.
The stated maximum load is 570 lb, and the tire uses a 4-ply rating with multi-trace tread. Measure the old tire's outside diameter, section width and hub before buying, since the maker describes fit for mowers with dimensions around 14.2 inches in outer diameter and 5.3 inches in section width.
This option can save the step of mounting a separate tire and rim. For more riding mower choices, see our best riding lawn mower wheels and tires.
Makorae 2 Pack 15x6.00-6 Lawn Mower Tire: Best for turf-friendly riding mower tread
- 15 x 6.00-6 tire size
- 3 in centered hub
- 3/4 in bushing
- 400 lb load capacity
- Turf Saver tread
This pre-assembled riding mower pair has Turf Saver tread and a centered 3-inch hub. Check tire size, hub length and bushing size against the old wheel.
Pros
- Turf Saver tread pattern
- Pre-assembled pair
- One-year warranty
Cons
- Not a walk-behind drive wheel
- Fit requires matching hub and bushing dimensions
Makorae is another riding mower tire and wheel assembly for a matching 15 x 6.00-6 setup. It has a 3-inch centered hub, 3/4-inch bushing and Turf Saver tread, with a stated load capacity of 400 lb.
The assembly arrives preassembled, so you don't need to source a separate rim or inner tube. Confirm the tire size and hub measurements on your current wheel before choosing it.
The tread is designed for lawn use, but axle fit still decides whether this assembly works on your mower. It belongs in the comparison only when your Craftsman is a riding mower with matching dimensions.
CLSR2U 634-05040 8x2 inch Lawn Mower Front: Best for select MTD family mowers
- 8 in diameter
- 2 in width
- 1/2 in bore
- 53-tooth drive gear
- 2 wheel assemblies
These wheels replace 634-05040 and name select Craftsman, Cub Cadet, Brute and Troy-Bilt models. Use the mower model and original part number to confirm fit.
Pros
- 53-tooth drive gear
- Two wheel assemblies included
- Names several mower families and models
Cons
- Not a universal Craftsman fit
- 2-inch width may not match narrower wheels
CLSR2U uses the 634-05040 replacement number and names select Craftsman, Cub Cadet, Brute, MTD Gold, Columbia, Yard Man, Snapper and Troy-Bilt mowers. Its 8-by-2-inch wheel has a 1/2-inch bore and 53-tooth drive gear.
The compatibility details include Craftsman M210, M215 and M230, along with certain 247-series models. The broad set of brands doesn't make this a universal wheel, so match both the model and OEM number.
Choose this pair when your old wheel is 2 inches wide and uses the 634-05040 part family. A narrower 1-3/4-inch wheel may not sit or engage in the same way.
CheeMuii 583719501 Lawn Mower Wheels 2 Pcs: Best for a 53-gear 8-inch pair
- 8 in diameter
- 1-3/4 in width
- 1/2 in bore
- 53-tooth drive gear
- 2 wheels
This pair replaces several common front drive wheel numbers, including 583719501 and 194231X460. Its stated compatibility covers many Craftsman and other walk-behind models.
Pros
- 53-tooth gear
- Two wheels included
- Several replacement numbers
Cons
- Confirm model fit before buying
- Gear compatibility matters for self-propelled mowers
CheeMuii is a 2-wheel option for the 583719501 family. Its stated size is 8 inches by 1-3/4 inches, with a 1/2-inch bore, 1-5/8-inch hub and 53-tooth gear.
The replacement numbers include 194231X460, 532403111 and 401274X460. The named compatible models include many self-propelled Craftsman and Husqvarna walk-behind mowers.
If your mower uses a self-propelled front wheel, the gear details make this more relevant than a plain rolling wheel. Confirm the mower's model and old part number first, especially if it uses a different gear family.
GICOOL 581009202 193912X460 Front Wheels for Husqvarna: Best for 193912X460 replacements
- 8 in diameter
- 1.75 in width
- 1/2 in bore
- 2 wheels
This pair replaces 193912X460 and related numbers, with stated compatibility for select Craftsman and Husqvarna models. It suits a different part-number family from the 583719501 options.
Pros
- Two wheels included
- Names compatible Craftsman models
- Useful for the 193912X460 part family
Cons
- Check the exact mower model
- Different part-number family from common 583719501 wheels
GICOOL's 581009202 and 193912X460 pair is for a different part-number family from the 583719501 wheels above. It measures 8 inches in diameter, 1.75 inches wide and has a 1/2-inch bore.
The compatible model details include select Craftsman and Husqvarna mowers, such as Craftsman 917375830 and 917376733. Check the full model number and confirm that your old wheel uses 193912X460 or a related number.
Choose it when that part family matches your mower. If your riding mower has stopped moving, the problem may involve more than its front wheels; see why a riding mower is not moving.
What should you measure before buying Craftsman front wheels?
Measure the wheel diameter, width, bore and hub, then check the original part number. For deck-mounted wheels, compare lawn mower deck wheels and verify their fit separately.
For a self-propelled mower, verify that the drive gear matches the old wheel.
An 8-inch diameter is common among the walk-behind options here, but widths differ between 1-3/4 and 2 inches. A wheel can appear close in size and still fail to sit correctly if the bore or hub length is wrong.
Use the mower model number as a second check. If you're unsure which model you own, our guide on how old a Craftsman lawn mower is explains where to look for its identification details.
How do drive gears affect front wheel fit?
Drive gears must mesh with the mower's drive mechanism for self-propelled wheels to work as intended. Several options here specify 53-tooth gears, while other product details do not give a tooth count.
Compare the old wheel's gear arrangement and replacement number before ordering. If the replacement pair rolls freely but the mower does not move under power, inspect the drive system as well as the wheels.
Craftsman mower models can use different suppliers and part families over time. Our overview of who makes Craftsman lawn mowers gives brand context, but the model and part number remain the key fit checks.
Should you replace one wheel or both?
A two-wheel set is useful when both front wheels are worn or when you want matching dimensions and tread. All the options in this roundup include a pair.
If only one wheel is damaged, compare the old wheel on the opposite side before deciding. Matching the diameter, width and gear can help keep the mower level and the drive engagement consistent.
How can you tell whether the issue is the wheel or the drive?
A damaged or stripped gear can prevent a self-propelled mower from pulling even when the engine runs. A mower that rolls but won't drive may also have a belt, cable or transmission problem.
Check for a cracked wheel, missing gear teeth and loose hardware before replacing parts. For walk-behind drive troubleshooting, the Toro Personal Pace repair guide walks through related checks.
Verdict: Which Craftsman lawn mower front wheels should you choose?
Choose TENGMUJX if your mower uses the 532403111 or 194231X427 family and the 8-inch, 1-3/4-inch dimensions match. Pick Sutmorly or CLSR2U for a verified 2-inch-wide wheel, and use the larger HLHgirl or Makorae assemblies only for a riding mower with matching tire and hub measurements.
The right Craftsman lawn mower front wheels are the ones that match your model, axle and drive gear. For broader walk-behind options, compare our guide to the best lawn mower replacement wheels, and use the front-tine tiller guide when your next yard job calls for soil preparation.
Our top 3 picks at a glance
-
1
Best for common 8-inch Craftsman drive wheelsTENGMUJX 532403111 194231X427 Front Drive Wheels Fits
9.7/10 our score
See it on Amazon -
2
Best for 53-tooth 2-inch wheelsSutmorly 634-05039 Front Drive Wheels Fits Troy-Bilt
9.6/10 our score
See it on Amazon -
3
Best for 1-3/4-inch replacement wheelsGrasscape 2 Pack 583719501 194231X460 Front Lawn
9.5/10 our score
See it on Amazon
Frequently asked questions
How do I know which front wheels fit my Craftsman mower?
Match the mower's full model number and the old wheel's part number first. Then compare diameter, width, bore and hub dimensions, plus the drive gear if the mower is self-propelled.
The Craftsman name alone is not enough because different models use different wheel assemblies.
Are Craftsman front drive wheels interchangeable?
Some replacement wheels cover several Craftsman models, but they are not all interchangeable. A wheel with the right 8-inch diameter can still have the wrong width, bore, hub or gear arrangement.
Compare the old part number and mower model before ordering.
Do front wheels for a riding mower fit a walk-behind Craftsman?
No, riding mower tire and wheel assemblies are a different size and type from the small front drive wheels used on many walk-behind mowers. A 15 x 6.00-6 tire assembly needs a matching riding mower hub and bushing.
Use the tire size and axle measurements from your riding mower.
Does a 53-tooth gear matter on Craftsman front wheels?
Yes, when the front wheel engages the self-propelled drive. The gear must mesh with the mower's drive mechanism, so check the replacement number and the old wheel's gear before choosing a pair.
A plain wheel may roll but won't restore the same drive connection.
About this guide: Our look at Craftsman lawn mower front wheels draws on maker specs, materials and what owners report. See how we research.



