6 Best Replacement Blades for Ryobi Lawn Mowers (November 2026)
The best Ryobi lawn mower blades include the Ryobi RAC434 33cm Lawnmower Blade for OLM1833B for 33cm Ryobi cordless mowers, the Stens 310-020 Standard Blade Compatible with/Replacement for 21-inch Ryobi decks, and the SummerCool AC04020 2 Pack Mower Blades Replace for 20-inch 40V Ryobi mowers.
On this page (9 sections)
- Ryobi blade picks by deck size and model
- Side-by-side comparison of the Ryobi blades
- How we compared these Ryobi replacement blades
- Which Ryobi deck size do you have?
- How do I check the center hole before I order?
- Standard blade or mulching blade for Ryobi mowers?
- How often should you replace or sharpen Ryobi blades?
- How do I install a Ryobi replacement blade safely?
- Verdict: which Ryobi blade should you buy?
The best Ryobi lawn mower blades are the ones that match your deck width, model number and center hole shape. A blade that is even 1 inch too long or too short will not seat correctly, and a round hole will not fit a square or half-moon mount.
Ryobi lawn mower blades in this guide cover 33cm, 16-inch, 20-inch and 21-inch decks, so the right pick starts with your mower, not with the highest score.
Poor fit matters more than extras like coatings or pack size. A correct blade sits flat, tightens fully and leaves the cutting edge at the height your deck expects.
That is why we checked length, center hole, center to center spacing and listed compatibility for every option here.
If you are new to blade changes, our guide to how to change lawn mower blades is optional reading before you start, and this roundup focuses on choosing the right replacement. You can also compare broader options in our guide to best lawn mower blades if your mower is not a Ryobi.
Our picks at a glance
-
1
Best for 33cm Ryobi cordless mowersRyobi RAC434 33cm Lawnmower Blade for OLM1833B
9.7/10 our score
See it on Amazon -
2
Best for 21-inch Ryobi decksStens 310-020 Standard Blade Compatible with/Replacement
9.5/10 our score
See it on Amazon -
3
Best for 20-inch 40V Ryobi mowersSummerCool AC04020 2 Pack Mower Blades Replace
9.3/10 our score
See it on Amazon
- 4
Check itFoifatt 16-Inch Lawn Mower Blade for Ryobi
Best for 16-inch Ryobi decks - 5
Check itFoifatt AC18160 Lawn Mower Blade for RYOBI
Best for 18V brushless 16-inch mowers - 6
Check itKOLTRUNEX AC04020 Mower Blades
Best for 20-inch mulching refresh
Ryobi blade picks by deck size and model
The Ryobi RAC434 leads because it is a direct 33cm Ryobi part for named cordless models. The Stens 21-inch blade follows for owners with a larger single-blade deck.
The remaining picks split the 16-inch and 20-inch choices by hole shape, sharpening and whether nuts are included.
Ryobi RAC434 33cm Lawnmower Blade for OLM1833B: Best for 33cm Ryobi cordless mowers
- 33cm replacement blade
- Single blade
- Compatible with OLM1833B, RLM18C33B25, RLM18X33B40 and RLM18X33B50
A 33cm Ryobi blade for the listed 18V cordless mowers, so it suits owners who want the same size as the original.
Pros
- Exact 33cm size for listed models
- Ryobi part RAC434
- Single blade for simple replacement
Cons
- Only fits the listed 33cm models
- No spare blade in the pack
This blade suits owners of the Ryobi OLM1833B, RLM18C33B25, RLM18X33B40 or RLM18X33B50. Those four models are named as compatible, so there is little guesswork if your mower is one of them.
The 33cm length matches a 33cm deck, which means the tip reach and balance are the same as the original. A single blade is included, so you should keep a spare if you mow thick grass often.
Ryobi lists this as model RAC434 and part number 5132004516. It weighs 8.8 ounces, which is light enough to handle safely with gloves during a blade change.
The 33cm size also sets expectations for pass width. On a small cordless deck, that shorter reach is normal, and it suits smaller yards where a 20 or 21 inch deck would be harder to steer around beds and paths.
The trade-off is narrow fit. It will not help a 16-inch, 20-inch or 21-inch Ryobi deck, even though Ryobi makes all of those sizes.
If your deck is not 33cm, look at the other picks below.
Stens 310-020 Standard Blade Compatible with/Replacement: Best for 21-inch Ryobi decks
- 21-inch standard blade
- 7/8-inch center hole
- 3 7/16-inch center to center
- 2-inch width and 0.105-inch thickness
A 21-inch standard blade that replaces Ryobi 682534 and AC04025 for the listed RY401150US, RY401140US, RY401200 and RY4011060US mowers.
Pros
- 21-inch length for larger decks
- Replaces two Ryobi part numbers
- Standard blade shape
Cons
- Only for the listed 21-inch models
- Single blade, so plan for a spare
This blade suits owners of the Ryobi RY401150US, RY401140US, RY401200 or RY4011060US. It is a standard blade, so it favors a clean, straight cut and bagging over heavy mulching.
The 21-inch length fits a 21-inch deck and gives more coverage per pass than smaller blades. Its center hole is 7/8 inch, with 3 7/16 inch from center to center, so those two numbers must match your original.
Stens says it replaces Ryobi 682534 and AC04025. That part-number match is more useful than the deck size alone, because Ryobi reuses deck sizes across different model families.
The blade is 2 inches wide and 0.105 inch thick, made from alloy steel. It comes as a single blade at 1.1 pounds, so order two if you want a ready spare.
That width and thickness matter in daily use. A 2 inch wide blade presents a broad cutting surface, while the 0.105 inch thickness gives stiffness against bending in dense grass.
The trade-off is that this is a standard blade for a specific 21 inch group, not a mulching blade for 20 inch decks. If you mulch most of the time, the 20 inch mulching packs below may suit your routine better.
SummerCool AC04020 2 Pack Mower Blades Replace: Best for 20-inch 40V Ryobi mowers
- 2-pack of 20-inch blades
- 19.25-inch blade length for 20-inch decks
- 0.886-inch center mounting hole
- Mulching design
- Heavy-duty steel
A 2-pack of 20-inch mulching blades for listed Ryobi 40V 20-inch mowers, with a round standard center hole.
Pros
- Two blades in one pack
- Mulching design for finer clippings
- Pre-sharpened steel
Cons
- Not for CrossCut dual-blade models
- Check hole shape before ordering
This 2-pack suits owners of listed Ryobi 40V 20-inch mowers, including RY40180, RY40190, RY401110 and RY401120 in single-blade form. It is a mulching design, so it chops clippings more finely than a standard blade.
The 19.25-inch length is made for a 20-inch deck, with a 1.97-inch width and 0.106-inch thickness. The center mounting hole is 0.886 inch and round, so check that your original uses a round hole.
SummerCool says the steel is pre-sharpened and heavy-duty, and the pack gives you two blades for a full refresh. That matters if you want one blade on the mower and one ready to install later.
The double suction design is meant to pack the bag and cut cleaner in the brand description. In practice, that mulching shape is best when you are mulching often and want fewer visible clippings left on the surface.
Do not use it on CrossCut dual-blade models or on a blade with a half-moon and rounded square hole at the other end. Those warnings tell you the mount system is different, and forcing fit can damage the deck.
Compared with the KOLTRUNEX 2-pack below, this SummerCool pack has a slightly longer 19.25 inch blade and no nuts listed in the contents. That small length difference is why you should measure your old blade, not just your deck.
Foifatt 16-Inch Lawn Mower Blade for Ryobi: Best for 16-inch Ryobi decks
- 16-inch deck blade
- 15.75-inch length
- 7/8-inch center mounting hole
- Hardened steel
- Replaces 639180003 and AC04154
A 16-inch hardened steel blade for listed Ryobi 16-inch mowers, with a 7/8-inch center hole.
Pros
- Made for 16-inch decks
- Hardened steel construction
- Replaces AC04154
Cons
- Not for 18, 20 or 21-inch decks
- Single blade pack
This blade suits owners of listed Ryobi 16-inch mowers, including RY40140, RY40104, P1111, P1100, P1120 and P1102. It is made for 16-inch decks only, so deck size is the first check.
The 15.75-inch length and 7/8-inch center hole match a 16-inch deck with a round mount. It is 1.97 inches wide and 0.10 inch thick, in hardened steel for steady use.
Foifatt says it replaces 639180003 and AC04154. If your original is AC04154, this is the round-hole version you need, not the square-hole AC18160.
The spacing details help confirm fit before you order. Foifatt lists 1.10 inch top to center and 0.925 inch center to bottom, so compare those numbers with the old blade if your deck uses that layout.
Hardened steel is the material claim here, and it is meant for prolonged use without wearing out quickly. For a 16 inch mower, that durability matters because a smaller deck often makes more passes over the same yard.
The trade-off is that it is a single blade and it is clearly not for 18-inch, 20-inch or 21-inch decks. Measure your deck and check the hole before you order, because 16-inch Ryobi mowers use more than one hole shape.
Foifatt AC18160 Lawn Mower Blade for RYOBI: Best for 18V brushless 16-inch mowers
- AC18160 16-inch blade
- Half-moon plus square center hole
- Hardened steel
- Compatible with P1190 and P1109
A 16-inch AC18160 blade for Ryobi 18V brushless P1190 and P1109 mowers, identified by its half-moon plus square center hole.
Pros
- Made for P1190 and P1109
- Hardened steel
- Correct hole shape for AC18160
Cons
- Not the round-hole AC04154 type
- Only for listed models
This blade suits owners of the Ryobi 18V brushless P1190 and P1109 mowers. Those two models are the only compatibility list given, so model number matters here.
The AC18160 center hole is half-moon plus square. That shape is the whole point of this pick, because the similar AC04154 uses a half-moon plus round hole and is not interchangeable.
Foifatt says the blade is hardened steel and designed to prevent clippings buildup for a cleaner cut. It is a 16-inch blade at 13.7 ounces, so it is easy to store as a spare.
The brand also notes that replacing the blade annually helps maintain best performance. That guidance fits a hardened steel blade, since a fresh edge keeps the cut clean even before visible damage appears.
Package size is 16.14 by 4.57 by 0.75 inches, which gives a sense of the blade footprint. That long, narrow pack is typical for a 16 inch blade, and it should store flat in a shed.
If your original blade has a round center hole, this is the wrong blade even though the deck size matches. Pull the old blade or check a photo of the mount before ordering, and you will avoid a return.
KOLTRUNEX AC04020 Mower Blades: Best for 20-inch mulching refresh
- 2 mulching blades and 2 nuts
- 19.21-inch length
- 1.97-inch width and 0.100-inch thickness
- Round center hole
- Heat-treated steel
- Black powder coating
A 2-pack of 20-inch mulching blades with nuts included, for listed Ryobi 40V 20-inch single-blade mowers.
Pros
- Includes 2 blades and 2 nuts
- Mulching design
- Heat-treated steel
Cons
- Not for CrossCut dual-blade systems
- Not fit for AC04029
This 2-pack suits owners of listed Ryobi 40V 20-inch mowers, including RY40108, RY40109, RY401011, RY401012 and RY40LM03. It is aimed at single-blade decks, not CrossCut dual-blade systems.
The 19.21-inch length, 1.97-inch width and 0.100-inch thickness fit a 20-inch deck. The round center hole must match your original, and the pack includes 2 nuts along with the 2 blades.
KOLTRUNEX says the blades are heat-treated steel with a black powder coating for corrosion resistance. The coating can wear off in use, and that does not affect cutting, according to the brand.
The mulching design should return finer clippings to the lawn. The precision ground edges are described as optimized for cordless mower runtime and airflow, which matters on 40V decks where battery use is part of daily performance.
This pack replaces OEM numbers 682162001, 635373001 and AC04020. That list is useful because KOLTRUNEX also warns that it will not fit AC04029, so part number checks prevent a close but wrong order.
The trade-off is fit risk at the hole and system level. It is not for CrossCut, and the included nuts only help if the blade and hole shape are already correct for your mower.
Side-by-side comparison of the Ryobi blades
The table below puts length, hole shape and pack contents in one view. Use it to spot the main trade-off quickly: direct Ryobi fit, standard 21-inch cut, or mulching 20-inch packs.
| Product | Best for | Length | Package quantity | Item model number | Our score |
|---|---|---|---|---|---|
| Ryobi RAC434 33cm Lawnmower Blade for OLM1833B | 33cm Ryobi cordless mowers | 33cm | 1 | RAC434 | 9.7 |
| Stens 310-020 Standard Blade Compatible with/Replacement | 21-inch Ryobi decks | 21 inches | 9.5 | ||
| SummerCool AC04020 2 Pack Mower Blades Replace | 20-inch 40V Ryobi mowers | 19.25 inches | 9.3 | ||
| Foifatt 16-Inch Lawn Mower Blade for Ryobi | 16-inch Ryobi decks | 15.75 inches | 9.0 | ||
| Foifatt AC18160 Lawn Mower Blade for RYOBI | 18V brushless 16-inch mowers | 16 inches | 8.8 | ||
| KOLTRUNEX AC04020 Mower Blades | 20-inch mulching refresh | 19.21 inches | 8.6 |
A 33cm blade, a 16-inch blade and a 21-inch blade cannot swap across decks. The center hole is the second filter, because Ryobi uses round, square and half-moon mounts in the same deck size range.
Pack size is the third filter, since a 2-pack helps only after fit is confirmed.
The Stens blade is the only standard, non-mulching option at 21 inches. The SummerCool and KOLTRUNEX blades are mulching options at 20 inches, with different lengths and included hardware.
The two Foifatt blades look similar at 16 inches, but their hole shapes make them different parts.
How we compared these Ryobi replacement blades
We compared length, width, thickness, center hole size and shape, center to center spacing, listed model compatibility, replaced part numbers, material, pack count and included hardware. Those specs decide whether a blade fits and how it cuts.
Our score weighs specs, features and buyer feedback against what you are shopping for. A direct Ryobi part scores well for fit confidence, while aftermarket blades score on matching specs, steel type and pack value.
We did not test these blades by hand. We checked the specs each brand publishes and we show the exact model numbers so you can match your own mower before you buy.
What the specs mean in daily use
Length controls pass width and whether the tip clears the deck. Width and thickness affect stiffness, clipping lift and how the blade holds an edge through thick grass.
Center hole size and shape control whether the blade seats at all, which is why a half-moon plus square hole cannot be replaced by a round hole of a similar size.
Material claims such as alloy steel, hardened steel and heat-treated steel describe how the edge is meant to resist wear and bending. Pack count and included nuts do not change cutting quality, but they change how easy it is to keep a sharp spare ready for the next swap.
Which Ryobi deck size do you have?
A 33cm deck needs a 33cm blade, a 16-inch deck needs a 16-inch blade, a 20-inch deck needs a 20-inch blade and a 21-inch deck needs a 21-inch blade. Start there, because no hole shape or coating can fix a wrong length.
33cm Ryobi cordless decks
The Ryobi RAC434 fits the OLM1833B, RLM18C33B25, RLM18X33B40 and RLM18X33B50. If your model is not on that list, do not assume a 33cm blade from another brand will fit.
16-inch Ryobi decks
Two 16-inch picks cover two hole shapes. The Foifatt AC04154 type uses a round hole, while the Foifatt AC18160 uses a half-moon plus square hole.
Your original blade tells you which one you need.
20-inch and 21-inch Ryobi decks
The 20-inch mulching packs fit listed 40V single-blade models, while the Stens 21-inch standard blade fits its four listed models. CrossCut dual-blade mowers need a separate check and are not covered by the 20-inch single blades here.
How do I check the center hole before I order?
The center hole shape is the most common reason a correct-length blade will not fit. Look at the middle of your old blade and note whether it is round, square, half-moon plus round, or half-moon plus square.
Round center hole
The SummerCool and KOLTRUNEX 20-inch blades and the Foifatt 16-inch AC04154 type use round mounts. Measure the hole size as well as the shape, because a round hole in the wrong size will still fail.
Half-moon plus square hole
The Foifatt AC18160 uses this shape for the P1190 and P1109. If your blade has this shape, do not order the round-hole AC04154 version.
Center to center spacing
The Stens 21-inch blade lists 3 7/16 inch from center to center. That spacing matters on multi-mount blades, so copy it from your old blade and compare it before you order.
Standard blade or mulching blade for Ryobi mowers?
A standard blade lifts and cuts grass for bagging or side discharge with a clean finish. A mulching blade has extra lift and cutting surfaces that chop clippings into smaller pieces as they leave the deck.
Choose a standard blade
Pick the Stens 21-inch standard blade if you bag often or mow damp grass. Its straight standard shape suits a mower set up for collection, and the 21-inch length covers a larger deck in fewer passes.
Choose a mulching blade
Pick the SummerCool or KOLTRUNEX 20-inch blades if you mulch most of the time. Their designs chop clippings more finely, which can return nutrients to the lawn and reduce visible clumps.
Match the blade to your deck use
Do not switch types just because a blade is on sale. Your deck, discharge cover and bagger setup were built around one cutting style, and the blade should match that setup.
How often should you replace or sharpen Ryobi blades?
You should inspect the edge after every 20 to 25 hours of mowing and look for nicks, rounding and bent tips. Grass that tears instead of cutting cleanly is a sign the edge needs work.
Our guide on how often to sharpen lawn mower blades covers the timing in more detail, and our steps for how to sharpen lawn mower blades can extend a blade's life between replacements.
Sharpen when the edge wears
A dull edge pushes grass over instead of slicing it, which leaves frayed tips and a rough look. Sharpening restores the edge, but it cannot fix a bent or cracked blade.
Replace when the steel is damaged
Replace a blade that is bent, cracked, heavily nicked or worn past the manufacturer's balance marks. A new blade is safer and cheaper than a deck repair.
Keep a spare blade ready
A 2-pack or a spare single blade lets you swap in minutes and sharpen the old one later. That habit helps most on 20-inch decks, where the packs in this guide include two blades.
How do I install a Ryobi replacement blade safely?
Safe install starts with the mower off, the battery removed or the spark plug wire disconnected, and gloves on. Turn the mower so the deck is stable before you touch the blade area.
Remove and match the old blade
Take off the old blade and hold the new one against it. Check length, hole shape, hole size and which side faces down, because a reversed blade will not cut as designed.
Tighten and check balance
Fit the new blade on the mount, add the nut and tighten it firmly. Spin the blade by hand to confirm it turns freely and does not wobble or strike the deck.
Test on grass
Run the mower on a short, dry patch first and look for an even cut across the full width. Uneven stripes can mean the blade is loose, reversed or the wrong length for the deck.
Verdict: which Ryobi blade should you buy?
Buy the Ryobi RAC434 if you own a listed 33cm cordless model, because it is the direct Ryobi size with the least fit risk. Buy the Stens 21-inch blade for a listed 21-inch Ryobi deck and a standard cut.
Buy the SummerCool 2-pack for a listed 20-inch 40V mower if you want mulching performance and a spare blade. Buy the KOLTRUNEX 2-pack instead if included nuts and a powder-coated finish matter more to you.
For 16-inch decks, buy the Foifatt AC04154 type for a round hole or the Foifatt AC18160 for a half-moon plus square hole. That one check decides the pick, so confirm your hole shape first.
If you own a Toro instead, our guide to the best Toro lawn mower blades covers that brand's fit rules, and our guide to best lawn mower blades for zero turn mowers covers wider decks. For Ryobi owners, the best Ryobi lawn mower blades are simply the ones that match your deck, model and center hole exactly.
Our top 3 picks at a glance
-
1
Best for 33cm Ryobi cordless mowersRyobi RAC434 33cm Lawnmower Blade for OLM1833B
9.7/10 our score
See it on Amazon -
2
Best for 21-inch Ryobi decksStens 310-020 Standard Blade Compatible with/Replacement
9.5/10 our score
See it on Amazon -
3
Best for 20-inch 40V Ryobi mowersSummerCool AC04020 2 Pack Mower Blades Replace
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I know which Ryobi blade size I need?
Match the blade length to your deck width first. A 16-inch deck needs a 16-inch blade, a 20-inch deck needs a 20-inch blade, and a 21-inch deck needs a 21-inch blade.
Then check the center hole shape and size before you order.
What is the difference between AC04154 and AC18160?
Both fit 16-inch Ryobi mowers, but the center hole differs. AC04154 uses a half-moon plus round hole, while AC18160 uses a half-moon plus square hole.
Your original blade will show which shape you need.
Can I use a 20-inch blade on a CrossCut mower?
No. CrossCut models use a dual-blade system and need their own matched blades.
The 20-inch single blades in this guide list specific single-blade models, so check your exact model number first.
About this guide: Our look at Ryobi lawn mower blades draws on maker specs, materials and what owners report. See how we research.



