9 Best Toro Lawn Mower Blades (November 2026)

The best Toro lawn mower replacement blades include the Toro Genuine OEM 2-Pack Mulching Blades 131-4547-03 for 22 in Recycler owners, the Oregon 22 Inch Lawn Mower Blade for broad 22 in model coverage, and the MaxPower 331376XB USA MADE Commercial Mulching Mower for a 22 in commercial-style replacement.

On this page (5 sections)

1. The best replacement blades for Toro mowers
2. How to choose lawn mower blades for Toro mowers
3. Mulching blades versus high-lift Toro blades
4. How to install and care for Toro replacement blades
5. Which Toro lawn mower blade should you choose?

The best Toro lawn mower blades for most 22 in Recycler owners are the Toro Genuine OEM 2-Pack 131-4547-03. For other Toro mowers, match the blade to deck size, model, OEM part number, center hole and mounting pattern.

Toro uses different blade families across walk-behind and riding ranges. A blade that looks right for one deck can be wrong in length or center hole for another.

A 22 in walk-behind needs a very different blade from a 50 in or 60 in TimeCutter. Walk-behind options here cluster around 21 in lengths, while larger decks use shorter blades in a multi-blade layout.

If you also maintain a Honda walk-behind, compare Honda replacement mower blades. Using model and part number first saves the same guesswork there.

Length and width are not enough on their own. Center hole size, outside mounting holes and blade count all affect whether a replacement installs and sits flat.

Pack size changes value. A two-pack suits a homeowner who wants a spare, while a single blade suits a direct swap.

Blade style is the next split. Mulching and toothed designs recut clippings under the deck, while high-lift designs use stronger airflow for bagging or side discharge.

For a 22 in Recycler, several options replace the same part numbers, so small width and mounting differences decide the fit. Keeping the old blade beside the specs makes that comparison easier.

If you want a wider starting point, see best lawn mower blades. That broader view helps when you are new to blade types.

For installation, follow How to Change Lawn Mower Blades?. Safe removal, correct orientation and proper tightening matter as much as choosing the replacement.

Use the picks below in order. Start with deck size and model, then confirm part numbers, then compare remaining specs.

Our picks at a glance

1. 1
   Best for 22 in Recycler owners

   Toro Genuine OEM 2-Pack Mulching Blades 131-4547-03

   9.7/10 our score

   See it on Amazon
2. 2
   Best for broad 22 in model coverage

   Oregon 22 Inch Lawn Mower Blade

   9.6/10 our score

   See it on Amazon
3. 3
   Best for a 22 in commercial-style replacement

   MaxPower 331376XB USA MADE Commercial Mulching Mower

   9.5/10 our score

   See it on Amazon

4. 4

   Fxsmgdy 115-9649-03 105-7718-03

   Best for 60 in TimeCutter decks
   Check it
5. 5

   Cooouds 115-5059-03 mower blades Replace toro 79016P

   Best for 50 in TimeCutter Z models
   Check it
6. 6

   budrash 131-4547-03 Mulching Blade for Toro 22"

   Best for a 22 in two-blade replacement
   Check it
7. 7

   Hipa 131-4547-03 Mulching Blades for Toro

   Best for a coated alloy-steel 22 in option
   Check it
8. 8

   8TEN LawnRAZOR Blade for Toro 21-Inch Recycler

   Best for 21 in Recycler walk-behind mowers
   Check it
9. 9

   Grasscool Timecutter 50 inch Mower Blades

   Best for 50 in TimeCutter bagging
   Check it

The best replacement blades for Toro mowers

The best replacement depends on your Toro deck and the blade style you need. The first three picks focus on common 22 in Recycler replacements, while the remaining options cover 21 in walk-behind and larger TimeCutter decks.

Our score weighs specs, features and buyer feedback against what you're shopping for. We did not treat a high score as proof that a blade fits every Toro mower.

Toro Genuine OEM 2-Pack Mulching Blades 131-4547-03: Best for 22 in Recycler owners

1

Toro Genuine OEM 2-Pack Mulching Blades 131-4547-03: Best for 22 in Recycler owners

9.7/10Our score

• 2-pack
• 21.3 in blade
• Genuine Toro OEM
• Fits many newer and older 22 in Recycler mowers

The genuine Toro 2-pack is the clearest match for many 22 in Recycler mowers. It replaces 108-9764-03 and covers several newer and older units.

See it on Amazon

Pros

• Genuine Toro OEM blades
• 2-pack
• Clear 22 in Recycler focus

Cons

• Compatibility still needs a model or serial-number check

The Toro Genuine OEM 2-Pack 131-4547-03 is the clearest choice when your mower uses this part number. Each blade measures 21.3 in, and the pack contains two genuine Toro OEM blades.

The blades are made for many newer and older 22 in Recycler mowers. Listed examples include 21472, 21465, 21464, 21462, 21447, 21445, 21442, 21378 and other compatible units.

This pick suits owners who want Toro-branded parts and a spare in the same pack. Check model and serial-number compatibility before ordering, since the same deck label can cover different blade setups.

Clean the mounting area before fitting, since packed grass under a washer can stop the blade sitting flat. Wear thick gloves, disconnect the spark plug wire on a gas mower, and keep the edge away from hands.

This option is for 22 in Recycler use, not 21 in models or larger TimeCutter decks. Matching 131-4547-03 is the fastest way to confirm the right family.

Oregon 22 Inch Lawn Mower Blade: Best for broad 22 in model coverage

2

Oregon 22 Inch Lawn Mower Blade: Best for broad 22 in model coverage

9.6/10Our score

• 21-11/16 in blade
• 7/16 in center hole
• Metal construction
• 1-pack

Oregon gives you a direct replacement option for many Toro 22 in models, along with detailed fit measurements and a long model list.

See it on Amazon

Pros

• Detailed dimensions
• Fits many listed Toro models
• Replaces several part numbers

Cons

• Only 1 blade

The Oregon 22 Inch Lawn Mower Blade is a 1-pack replacement with a 21-11/16 in blade, 2.25 in width and 7/16 in center hole. Its stated replacement numbers include 131-4547-03, 108-9764, 108-9764-03 and 59534 or 59534P.

Oregon lists many compatible Toro models, including 20070, 20071, 20072, 20073, 20074, 20075, 20076, 20330, 20331, 20332, 20333, 20334 and 20338. It also lists Lawn-Boy 10654, 10655 and 10656.

The blade uses metal construction and a Gator design intended to recut grass clippings. That makes it a useful option for a homeowner who wants one replacement blade with detailed dimensions and a broad stated model range.

The Gator profile is meant to keep clippings moving under the deck for extra cutting passes. In daily use that suits mulching where you want finer clippings returned to the lawn rather than collected.

The trade-off is simple: you get one blade, not a two-pack. Compare the old blade's length and center hole with the measurements above before you order.

The 0.149 in thickness and 2.25 in width give a clear spec to compare against the old blade. Measuring both before ordering avoids a close but wrong match.

This pick suits a single-blade swap on a listed 22 in model. If your deck needs a full set at once, a multi-blade pack may be the simpler route.

MaxPower 331376XB USA MADE Commercial Mulching Mower: Best for a 22 in commercial-style replacement

3

MaxPower 331376XB USA MADE Commercial Mulching Mower: Best for a 22 in commercial-style replacement

9.5/10Our score

• 21-11/16 in blade
• 2-1/4 in width
• 7/16 in center hole
• USA made

MaxPower is a strong 22 in choice when your old blade matches one of its listed OEM numbers. Its dimensions closely match common Toro Recycler replacements.

See it on Amazon

Pros

• USA made
• Mulching blade
• Matches several OEM numbers

Cons

• Single-blade pack

MaxPower's 331376XB is a commercial mulching blade for many 22 in Toro Recycler mowers. It measures 21-11/16 in long by 2-1/4 in wide and uses a 7/16 in center hole.

The blade replaces OEM numbers 104-8697-03, 108-9764-04 and 131-4547-03. MaxPower says the blade is made in the USA and manufactured to meet or exceed OEM specifications.

A powder coating covers the blade before installation. MaxPower says the coating comes off during the first cut, exposing the sharpened blade underneath.

The coating explains why the blade may look different at first than after a few passes. It is a handling and storage finish, not part of the cutting edge.

This is a one-blade option, so it suits a direct replacement when your existing second blade is not part of the job. Verify that the OEM number on your old blade matches one of the numbers above.

For owners who run a mulching setup, the recutting design keeps clippings under the deck longer. That can suit lawns where you want cut material returned rather than bagged.

Check the center hole and width against the old blade before ordering, since the 22 in label alone does not settle fit. A quick measure takes a minute and prevents a return.

Fxsmgdy 115-9649-03 105-7718-03: Best for 60 in TimeCutter decks

4

Fxsmgdy 115-9649-03 105-7718-03: Best for 60 in TimeCutter decks

9.2/10Our score

• 20.5 in blade
• 2.5 in width
• 5/8 in center hole
• Fits listed 60 in TimeCutter models

This Fxsmgdy blade targets 60 in Toro TimeCutter and Titan models. The 5/8 in center hole and 20.5 in length set it apart from walk-behind Recycler blades.

See it on Amazon

Pros

• 60 in deck focus
• Steel blade
• Broad listed TimeCutter coverage

Cons

• Not for common 21 in or 22 in walk-behind mowers

The Fxsmgdy 115-9649-03 and 105-7718-03 blade is for listed 60 in Toro TimeCutter and Titan models, not common walk-behind Recycler mowers. It measures 20.5 in long, 2.5 in wide, 0.24 in thick and uses a 5/8 in center hole.

Listed compatible models include TimeCutter MX6050, ZX6020, ZX6030, ZX6050, MX6000 and MX6080, along with several 6000 and Titan models. The product data also lists replacement number 133-2127.

Choose this blade only when your mower model and mounting hardware match the 60 in deck application. The larger deck category does not make it interchangeable with the 21 in or 22 in blades above.

The 20.5 in length is a useful clue. On a 60 in deck the cutting width comes from several blades working together, so a single walk-behind blade cannot cover the same span.

The biggest advantage here is clear coverage for a specific large-deck group. The main trade-off is that it has almost no use for owners of walk-behind Toro mowers.

Owners with a 60 in TimeCutter should confirm how many blades their deck uses before ordering. Matching the pack to the deck layout avoids being short on the day of the swap.

Keep the old blade for comparison on length, width and center hole. That physical check is more reliable than deck size alone when the model list is long.

Cooouds 115-5059-03 mower blades Replace toro 79016P: Best for 50 in TimeCutter Z models

5

Cooouds 115-5059-03 mower blades Replace toro 79016P: Best for 50 in TimeCutter Z models

9.0/10Our score

• 3-pack
• 17.5 in blade
• 5/8 in center hole
• Fits listed 50 in TimeCutter models

Cooouds is made for listed 50 in Toro TimeCutter Z models and replaces several related Toro part numbers. The 3-pack suits a three-blade deck.

See it on Amazon

Pros

• 3-pack
• 50 in TimeCutter focus
• Clear blade measurements

Cons

• Only fits the listed mounting and model pattern

Cooouds supplies a 3-pack of 17.5 in blades for listed 50 in Toro TimeCutter Z models. Each blade is 2.25 in wide, 0.16 in thick and has a 5/8 in circular center hole.

The blades replace 110-6837-03, 112-9759-03 and 115-5059-03. Listed mower examples include MX5060, SS5000, SS5060, SS5035, MX5025, MX3450, MX5075, MX5050, MX5000, SW5000, SWX5000 and SWX5050.

A three-blade pack fits the basic layout of a 50 in cutting deck. The key decision is confirming that your Toro model uses the 79016P or one of the related part numbers.

The 17.5 in length shows why this group is separate from 22 in walk-behind blades. Three shorter blades overlap to cover the wider deck.

This pick is not for a 22 in Recycler. Its 17.5 in length and 5/8 in center hole show why deck size and part number checks matter.

For a 50 in TimeCutter owner, replacing the full set at once gives an even cutting edge across the deck. That approach can make the next sharpening or replacement simpler to plan.

Measure the old blade and confirm the circular center hole before ordering. The model list is wide, so the part number is the safest starting point.

budrash 131-4547-03 Mulching Blade for Toro 22": Best for a 22 in two-blade replacement

6

budrash 131-4547-03 Mulching Blade for Toro 22": Best for a 22 in two-blade replacement

8.8/10Our score

• 2-pack
• 21-15/16 in blade
• 7/16 in center hole
• Serrated mulching edges

budrash offers a two-blade replacement for listed 22 in Toro Recycler and Lawn-Boy models. Its serrated edges are intended to recut clippings under the deck.

See it on Amazon

Pros

• 2-pack
• Serrated edges
• Several replacement numbers

Cons

• Measure the mounting pattern before ordering

budrash offers two mulching blades for listed 22 in Toro Recycler and Lawn-Boy models. Each blade measures 21-15/16 in long by 2-1/8 in wide and uses a 7/16 in center hole.

The blades replace 104-8697-03, 108-9764-03, 108-9764-02P, 108-9764, 108-9764-04 and 131-4546-03. Listed Toro examples include 20016, 20017, 20031, 20041, 20065, 20070, 20071, 20073, 20330, 20330C and 20332.

Serrated edges are intended to swirl clippings under the deck and chop them into smaller pieces. That design fits a mulching setup where you return cut grass to the lawn instead of collecting it.

The two sets of teeth are meant to reduce clogging on a push mower. In wet or thick grass, that recutting action can matter more than a plain edge.

The dimensions differ slightly from the Toro and Oregon 22 in options. Compare the old blade's width and mounting holes, not only the 22 in deck label.

The 2-1/8 in width is narrower than some rivals listed here, so a direct side by side check helps. Small width differences can affect how the blade fits under the deck housing.

This two-pack suits a homeowner who wants a matched pair for a 22 in Recycler. Confirm the outside hole spacing as well as the center hole before you order.

Hipa 131-4547-03 Mulching Blades for Toro: Best for a coated alloy-steel 22 in option

7

Hipa 131-4547-03 Mulching Blades for Toro: Best for a coated alloy-steel 22 in option

8.5/10Our score

• 2-pack
• Alloy steel
• 131-4547-03 replacement
• Mulching blade

Hipa provides two alloy-steel mulching blades for listed Toro 22 in Recycler mowers. The paint coating is intended to protect the blade during storage and installation.

See it on Amazon

Pros

• 2-pack
• Alloy steel
• Mulching design

Cons

• Specific mounting configurations need verification

Hipa supplies two alloy-steel mulching blades for listed Toro 22 in Recycler mowers. They replace 131-4547-03 and 108-9764-03 and use a circular blade mounting hole.

The blades are intended to chop clippings into fine pieces under the housing and spread them back onto the lawn. Hipa says the alloy steel includes chromium and molybdenum, and that the painted edges help protect against rust during handling.

The product data stresses that mounting holes can vary between machine model years. That makes the MPN and mounting configuration more useful than a generic search for lawn mower blades Toro.

The painted coating is mainly for storage and handling. It will wear away in use, so it should not be treated as a permanent finish on the cutting edge.

Inspect the blade for cracks, damage or wrapped grass before every installation. Hipa also recommends thick gloves and checking balance after sharpening.

A simple balance check can use a screwdriver through the center hole to see if one end tips. An unbalanced blade can vibrate and cut unevenly, so this check is worth doing after any sharpening.

The two-pack suits owners who want a spare blade for a 22 in Recycler. Verify the circular mounting hole against the old blade before ordering, since the same deck size can use different patterns.

8TEN LawnRAZOR Blade for Toro 21-Inch Recycler: Best for 21 in Recycler walk-behind mowers

8

8TEN LawnRAZOR Blade for Toro 21-Inch Recycler: Best for 21 in Recycler walk-behind mowers

8.3/10Our score

• 20-7/8 in blade
• 7/16 in center hole
• Toothed blade
• Fits listed 21 in Recycler models

The 8TEN LawnRAZOR is aimed at Toro 21 in Recycler push and rear-bagging mowers. Its 20-7/8 in length and toothed design differ from the common 22 in choices.

See it on Amazon

Pros

• 21 in Recycler fit
• Toothed design
• Clear dimensions

Cons

• Single blade

The 8TEN LawnRAZOR blade is for listed 21 in Toro Recycler push and rear-bagging push mowers. It measures 20-7/8 in long, 2-1/4 in wide and 0.138 in thick, with a 7/16 in center hole.

The blade is toothed and replaces OEM parts 133-8182-03 and 89914P. Its dimensions separate it from the common 22 in Toro blade family.

Choose it when your mower is a compatible 21 in Recycler and the old blade matches the stated part number. A 21 in deck should not be matched to a 22 in blade simply because both are walk-behind mowers.

The shorter 20-7/8 in length is the clearest sign of the difference. Using a longer blade on this deck could foul the housing or sit too close to the deck edge.

This is a one-blade pack. It works best as a direct replacement when you do not need a second blade at the same time.

The toothed profile suits mulching style cutting under the deck. Owners who bag with a rear bagger should still confirm the manual allows this blade type for that setup.

Measure the old blade before ordering and confirm the 7/16 in center hole. That check, plus the part number, is the safest way to place this blade in the right mower.

Grasscool Timecutter 50 inch Mower Blades: Best for 50 in TimeCutter bagging

9

Grasscool Timecutter 50 inch Mower Blades: Best for 50 in TimeCutter bagging

8.0/10Our score

• 3-pack
• 17-1/2 in blade
• 5/8 in center hole
• High-lift blade

Grasscool supplies three high-lift blades for listed 50 in Toro TimeCutter and Z models. The high-lift shape is aimed at bagging and side discharge.

See it on Amazon

Pros

• 3-pack
• High-lift design
• 50 in TimeCutter model coverage

Cons

• Not a match for 22 in Recycler decks

Grasscool supplies three high-lift blades for listed 50 in Toro TimeCutter and Z models. Each blade measures 17-1/2 in long, 2-1/4 in wide and 0.157 in thick, with a 5/8 in center hole.

The blades replace 110-6837-03, 115-5059-03, 112-9759 and 112-9759-03. Listed models include SS5000, SS5060, SS5035, MX5025, MX3450, MX5075, MX5050, MX5000, SW5000, SWX5000, SWX5050, Z5000, Z5020, Z5030, Z5060 and Z5035.

Grasscool describes the blades as high lift for bagging and side discharge. The airflow-focused design may suit tall or wet grass when the mower manual allows that blade type.

High lift blades push clippings toward the bagger or discharge chute with stronger airflow. That helps in damp conditions, but only when the deck and chute are designed for it.

The three-blade pack fits a 50 in deck, but model and part-number match still comes first. Do not use it as a replacement for a 22 in Recycler blade.

Paint on the edges prevents rust and protects hands during fitting. It will wear off in normal use, so do not rely on it as a long term coating.

How to choose lawn mower blades for Toro mowers

The best Toro mower blade is the one that matches the mower model and mounting pattern. Use this order when comparing options:

1. Find the mower model number on the machine or in the manual.
2. Read the OEM number from the old blade if it is still visible.
3. Confirm the deck size and mower type, such as 21 in Recycler, 22 in Recycler or 50 in TimeCutter.
4. Compare blade length, width, thickness and center-hole diameter.
5. Check the outside mounting holes and their spacing.
6. Confirm whether you need mulching, toothed or high-lift blades.
7. Match the number of blades in the pack to the deck.

For a 22 in Recycler, the 131-4547-03 family appears across several picks. The measurements are not identical in every option, so use the old blade and mower manual to resolve close matches.

For a 50 in TimeCutter, look for the 17.5 in blade group with a 5/8 in center hole. For a 60 in TimeCutter, the Fxsmgdy option uses a 20.5 in blade and a different model family.

Owners comparing other mower brands can also review best ryobi lawn mower blades and best husqvarna lawn mower blades for brand-specific part matching.

Mulching blades versus high-lift Toro blades

Mulching blades recut clippings under the deck and return them to the lawn. High-lift blades create stronger airflow for bagging or side discharge, but your mower must be designed for that style.

If you leave clippings on the lawn, a mulching design keeps them under the deck for repeated cuts. If you bag or discharge to the side, airflow becomes more important.

A high-lift profile moves material out of the deck faster in tall or wet grass. Stronger airflow can also lift dust and throw clippings further, which may not suit a mulching lawn.

The Toro OEM, Oregon, MaxPower, budrash and Hipa options here focus on 22 in mulching. They are aimed at Recycler decks where clippings are recut and returned.

The 8TEN option is toothed, while Grasscool is high-lift for listed 50 in TimeCutter models. That split shows how deck size and blade style are linked.

Choose the blade type that matches your mowing method, deck design and manual. The manual is the final word on whether a high-lift blade is allowed.

Fit still comes before style. Pick the profile that matches how you actually mow most weeks, once length, center hole and mounting pattern match.

How to install and care for Toro replacement blades

Remove the ignition key and disconnect the spark plug wire before working under a gas mower. For electric models, remove the battery or disconnect the power source according to the manual.

That first step stops the blade turning while your hands are near it. It is worth doing even for a quick look under the deck.

Wear thick gloves and block the blade so it cannot turn while you loosen the fastener. Note the cutting-edge direction before removal, then clean grass and debris from the mounting area.

Take a photo of the old blade in place if you are unsure of the direction. After installation, tighten the fastener using the manual instructions and check the blade sits flat.

A flat seat matters for balance and cutting height. Dirt trapped under the blade can cause wobble and uneven results.

Sharpening should preserve the blade shape and balance. Read How Often Should You Sharpen Lawn Mower Blades? for a schedule based on conditions.

Check balance after sharpening, since removing metal from one side more than the other can cause vibration. Before winter storage, clean and inspect the mower, then follow How To Winterize Toro Lawn Mower?.

Replace a blade with serious cracks, deep damage or heavy wear instead of trying to restore it. Store spare blades dry, and inspect blades during the season for nicks, bends or wrapped twine.

Which Toro lawn mower blade should you choose?

Choose the Toro Genuine OEM 2-Pack 131-4547-03 when you own a compatible 22 in Recycler and want the clearest Toro-branded match. Choose Oregon or MaxPower when your 22 in mower matches their listed replacement numbers and you want a single aftermarket blade.

For a 22 in Recycler, the choice is mostly pack size and brand preference once fit is confirmed. A two-pack gives you a spare, while a single blade keeps the job simple.

For a 21 in Recycler, choose the 8TEN blade only when the 133-8182-03 or 89914P match is correct. Its shorter length is not an alternative for a 22 in deck.

For a 50 in TimeCutter, compare Cooouds and Grasscool by blade type and exact model list. The Fxsmgdy option is the choice for listed 60 in decks, with no cross-over with walk-behind picks.

If you mulch most weeks on a 50 in deck, confirming the part number matters more than blade style. If you bag in wet conditions, the high-lift option may suit that routine better.

Match the OEM number and mounting pattern before comparing pack size or style. Keep the old blade until the new one is fitted and the mower has run.

Our top 3 picks at a glance

1. 1
   Best for 22 in Recycler owners

   Toro Genuine OEM 2-Pack Mulching Blades 131-4547-03

   9.7/10 our score

   See it on Amazon
2. 2
   Best for broad 22 in model coverage

   Oregon 22 Inch Lawn Mower Blade

   9.6/10 our score

   See it on Amazon
3. 3
   Best for a 22 in commercial-style replacement

   MaxPower 331376XB USA MADE Commercial Mulching Mower

   9.5/10 our score

   See it on Amazon

Frequently asked questions

What are the best Toro lawn mower blades for a 22 in Recycler?

The Toro Genuine OEM 2-Pack 131-4547-03 is the strongest starting point for many 22 in Recycler mowers. Oregon, MaxPower, budrash and Hipa also offer 22 in replacement options.

Match the mower model, blade part number, length, width and center hole before ordering.

How do I match lawn mower blades to a Toro mower?

Start with the mower model and the part number printed on the old blade or in the manual. Then compare blade length, width, center hole and mounting holes.

Deck size alone is not enough because Toro uses different blade patterns across Recycler and TimeCutter models.

Are Toro lawn mower blades interchangeable?

No. Toro lawn mower blades are not interchangeable just because they share a brand or deck-size label.

A 21 in Recycler blade, a 22 in Recycler blade and a 50 in TimeCutter blade can have different lengths, center holes and mounting patterns.

Confirm the exact part number first.

Should I choose mulching or high-lift blades for a Toro mower?

Choose mulching blades when you want clippings recut under the deck and returned to the lawn. Choose a high-lift blade when your mower and collection setup need stronger airflow for bagging or side discharge.

The blade must still match the mower's mounting pattern.