7 Best Replacement Blades for Husqvarna Lawn Mowers (November 2026)
The best Husqvarna lawn mower blades include the Husqvarna 587199603 Lawn Mower 22-in Deck Mulching for compatible 22 in walk-behind mowers, the Grasscool 46 inch Mower High Lift Blades for 46 in bagging and side discharge, and the Grasscool 54 inch Mower High Lift Blades for listed 54 in zero-turn decks.
On this page (5 sections)
The best Husqvarna lawn mower blades match your deck size, blade length, mounting hole and original part number. That check matters more than brand or blade style at first.
A close looking blade can still sit wrong on the spindle and leave an uneven cut.
Start with the mower you own. Find its model number on the frame or in the owner manual and compare it with the part number on the old blade.
Measure the old blade end to end and note the center hole shape before ordering. Those details matter even when two mowers share a deck size.
Our picks cover common setups. The Husqvarna 587199603 suits compatible 22 in walk-behind mowers needing a genuine mulching replacement.
The Grasscool 46 in and 54 in high lift blades suit listed riding and zero turn decks needing stronger airflow for bagging or side discharge.
The 48 in range needs care because several lengths and part numbers appear. Apeixoto, Husqvarna, Grasscool and budrash all offer 48 in options, and a fraction of an inch can affect clearance.
Measure before you order.
Think about how you mow most days. If you mulch often, start with a mulching blade matched to your deck.
If you bag or discharge in tall or wet grass, high lift may suit you better, if the blade is approved for your mower.
For a wider starting point, compare our best lawn mower blades guide. This roundup covers selected 22 in, 46 in, 48 in and 54 in Husqvarna and compatible replacements, so use it to narrow the choice rather than skip the fit check.
Use the original part number as your first filter when you can find it. If it is worn away, use mower model, deck size, blade length and mounting hole together.
When one detail does not line up, look for the exact replacement.
Our picks at a glance
-
1
Best for compatible 22 in walk-behind mowersHusqvarna 587199603 Lawn Mower 22-in Deck Mulching
9.7/10 our score
See it on Amazon -
2
Best for 46 in bagging and side dischargeGrasscool 46 inch Mower High Lift Blades
9.6/10 our score
See it on Amazon -
3
Best for listed 54 in zero-turn decksGrasscool 54 inch Mower High Lift Blades
9.5/10 our score
See it on Amazon
- 4
Check itApeixoto 3PCS Z248F 48 Inch Mower Blades
Best for a 3-blade 48 in replacement set - 5
Check itHusqvarna 48-Inch High-Lift Bagging Lawn Mower Blade
Best for Husqvarna 48 in bagging - 6
Check itGrasscool 48 inch Mower High Lift Blades
Best for checking 48 in blade length - 7
Best for a 3-pack with 180054 replacement numbersCheck it
The best Husqvarna lawn mower blades by deck and mowing job
The best replacement depends on the mower you already own. For another brand-specific fit check, see PowerSmart replacement mower blades.
Use the OEM Husqvarna blade when the part number matches, and choose a high-lift replacement when the correct deck, length and center hole are confirmed.
Our score weighs fit information, stated design, set size and buyer feedback against the needs of someone shopping for Husqvarna blades.
| Product | Best for | Deck | Part number | Blade type | Our score |
|---|---|---|---|---|---|
| Husqvarna 587199603 Lawn Mower 22-in Deck Mulching | compatible 22 in walk-behind mowers | 22 in | 587199603 | Mulching | 9.7 |
| Grasscool 46 inch Mower High Lift Blades | 46 in bagging and side discharge | 46 in | 9.6 | ||
| Grasscool 54 inch Mower High Lift Blades | listed 54 in zero-turn decks | 54 in | 9.5 | ||
| Apeixoto 3PCS Z248F 48 Inch Mower Blades | a 3-blade 48 in replacement set | 48 in | 9.4 | ||
| Husqvarna 48-Inch High-Lift Bagging Lawn Mower Blade | Husqvarna 48 in bagging | 48 in | 9.3 | ||
| Grasscool 48 inch Mower High Lift Blades | checking 48 in blade length | 48 in | 9.0 | ||
| budrash 48" Deck Mower Blades | a 3-pack with 180054 replacement numbers | 48 in | 8.7 |
Husqvarna 587199603 Lawn Mower 22-in Deck Mulching: Best for compatible 22 in walk-behind mowers
- Genuine Husqvarna OEM replacement part
- 22 in cutting width
- 1 blade
- Compatible with listed Husqvarna models
A genuine OEM mulching blade for compatible Husqvarna 22 in walk-behind mowers. Match the 587199603 part number and mower model before ordering.
Pros
- Genuine Husqvarna OEM part
- Clear 587199603 identification
- Fits listed walk-behind models
Cons
- Only 1 blade
- Limited to compatible 22 in mower applications
The Husqvarna 587199603 is the best match for a compatible 22 in walk-behind mower that needs a genuine replacement part. It is a metal mulching blade with a 22 in cutting width and a 587199603 manufacturer part number.
The set includes 1 blade, so it suits a single replacement rather than a multi-blade riding mower deck. The compatible model list includes HU700AWD, HU700F, HU700H, HU725AWD, HU725AWDE, HU725AWDEX, HU725AWDH and HU800AWDH, along with listed 961-series models.
Husqvarna identifies it as a genuine OEM replacement part. Match your mower's model and part number in the owner's manual before installation, because a 22 in cutting width does not confirm every 22 in Husqvarna mower.
Choose this blade when original fit and a mulching setup matter most. It is less useful if you need a 46 in, 48 in or 54 in riding mower blade set.
For a zero-turn setup, compare zero-turn mower blades.
Grasscool 46 inch Mower High Lift Blades: Best for 46 in bagging and side discharge
- 2 blades
- 23 in blade length
- 5-point star center hole
- Notched high-lift design
A 2-blade high-lift set for listed Husqvarna 46 in decks, including several YTH, YTA, RZ and Z246 models. Its notched design is aimed at bagging or side discharge.
Pros
- Broad listed 46 in fit range
- High-lift airflow design
- 2-blade set
Cons
- Must match the 5-point star hole
- Not for every Husqvarna deck
Grasscool's 46 in high lift set is the best fit for listed Husqvarna 46 in decks used for bagging or side discharge. The set has 2 blades, each 23 in long, with a 5 point star center hole.
The notched high lift design is intended to create airflow that moves clippings toward a bagger or side chute. That airflow matters most when grass is tall, thick or damp and a standard blade may leave clippings behind.
The stated blade width is 2-3/4 in, with a 5/32 in thickness and 1-3/16 in air lift. Those numbers help you compare the new blade with the old one, because width and lift affect how clippings are raised and sent through the deck.
The compatibility list covers Husqvarna YTH, YTA, RZ and Z246 models, including YTH22V46, YTH20K46, YTA22V46, RZ4623, TS246 and YTH2546. It also includes selected Poulan and Craftsman 46 in decks, which can help if your tractor shares the same deck and mounting pattern.
This is a useful choice when your mower has the matching 5 point star hole and a 46 in deck. Do not use the deck size alone as proof of fit, since the blade length and hole shape still need to match.
Check the replacement number, mounting hole and original blade length together before ordering. If all three align with your mower, the high lift profile is a sensible match for bagging or side discharge work.
Grasscool 54 inch Mower High Lift Blades: Best for listed 54 in zero-turn decks
- High-lift blade
- 18-7/16 in blade length
- 5-point star center hole
- Compatible with listed 54 in decks
A high-lift blade for listed Husqvarna and Craftsman 54 in decks. Check the replacement number, blade length and center-hole shape together before buying.
Pros
- Designed for listed 54 in decks
- High-lift profile
- Clear replacement numbers
Cons
- Only 1 blade
- Fit depends on exact deck and hole match
Grasscool's 54 in high lift blade suits listed Husqvarna and Craftsman decks, including the Husqvarna Z254F, Z254, MZ54, RZ5424, RZ5426 and YTH26V54. It is a single blade with an 18-7/16 in length and a 5 point star center hole.
The blade has a stated width of 2-1/2 in, thickness of 13/64 in and air lift of 1-3/8 in. Those measurements matter because a 54 in deck can use a specific blade arrangement, and the correct length is part of the fit.
The high lift design is intended for moving clippings through the deck toward a bagger or discharge path. Stronger airflow can help in thicker grass, but it depends on the deck, chute and collection setup on your mower.
The replacement numbers include 187256, 532187256, 187254 and 532187254. Matching one of those numbers to your original blade is a stronger sign of fit than the deck size on its own.
Measure the old blade and compare the center hole shape before you buy. The 5 point star hole must seat cleanly on the spindle without forcing or wobble.
Choose it when the exact replacement number and measurements match your mower. It is not a general replacement for every Husqvarna 54 in deck, so treat the model list as a guide rather than a promise.
Apeixoto 3PCS Z248F 48 Inch Mower Blades: Best for a 3-blade 48 in replacement set
- 3 blades
- 16-5/8 in blade length
- 5-star center hole
- Fits listed 48 in decks
A 3-piece set for listed Husqvarna Z248F, YTH, TS and related 48 in decks. Its 16-5/8 in length and 5-star hole are key fit checks.
Pros
- Three blades in one set
- Listed 48 in Husqvarna fitments
- Forged 65Mn manganese steel
Cons
- Requires exact fitment checking
- Only suits listed 48 in applications
Apeixoto's 3 piece set is the best choice when a listed Husqvarna 48 in deck needs three matching blades. Each blade is 16-5/8 in long with a 2-1/2 in width and a 5 star center hole.
The fitment list includes Husqvarna Z248F, Z248, Z4818, Z4822, Z4824, Z4218, RZ4824F, YTH2348, YTH24V48, YTH23V48, YTH2148, YTH24K48, YTH2448, TS348 and TS148 models with 48 in decks. That range makes the set worth checking if your mower model appears there.
The replacement numbers include 173920, 180054, PP24005, 575938201 and 532180054. Compare those numbers with the part number on your old blade or in your owner manual before ordering.
Apeixoto describes the blades as forged from 65Mn manganese steel and powder coated. The powder coating is presented as protection against rust in wet conditions, which matters if you store the mower in a damp shed or mow after rain.
This set makes sense for replacing all 3 blades at once. A matched set can help keep the cutting pattern even, especially on a deck where worn blades may be at different stages of use.
Wear gloves during installation and verify your mower model, original part number and blade length before fitting the set. Confirm the lift side faces the deck correctly and follow the torque and safety steps in your mower manual.
Husqvarna 48-Inch High-Lift Bagging Lawn Mower Blade: Best for Husqvarna 48 in bagging
- 3 blades
- Hardened steel
- Star-mount design
- Replaces OEM part 180054
A genuine Husqvarna 3-blade set for listed riding mower models, including YTH24V48 and TS148X/XK. The high-lift design is aimed at bagging or mulching.
Pros
- Husqvarna factory replacement part
- 3-blade set
- Hardened steel
Cons
- Compatibility list is model-specific
- Star mount must match your mower
The Husqvarna 48 in high lift bagging set is best for listed riding mowers that need 3 factory replacement blades. It fits selected models including YTH22V46, YTH24V48, TS 146X/XK/XD and TS148X/XK, and it replaces OEM part 180054.
The blades use hardened steel and a star mount design. Husqvarna describes the set as a high lift bagging blade option for bagging or mulching, with airflow intended to move cut grass through the deck.
Hardened steel is meant to help the edge stay sharp longer and run more smoothly. That can suit regular seasonal mowing, though the blade still needs inspection after contact with roots, rocks or other hard objects under the deck.
This set is a strong choice when you want a Husqvarna branded replacement and your model appears in the compatibility list. It is not enough to see 48 in in the mower name, because other 48 in decks may use a different blade length.
Check the model and star mount before ordering. Make sure the center hole shape matches your spindle and that the original blade length lines up with this set.
The 3 blade format also makes it practical for a riding mower deck that uses multiple blades. Replacing the full set at once can be simpler than fitting one new blade beside older ones.
Confirm the owner manual instructions before installation. Pay attention to blade direction, fastener tightening and the safe way to support the mower while the deck is raised.
Grasscool 48 inch Mower High Lift Blades: Best for checking 48 in blade length
- 16-3/4 in blade length
- 5-point star center hole
- High-lift design
- Replaces listed 180054 numbers
A high-lift option for listed Husqvarna 48 in decks, with a clear warning to distinguish 16-3/4 in blades from shorter alternatives. Measure your original blade before ordering.
Pros
- Clear length warning
- Broad listed 48 in fit range
- High-lift airflow design
Cons
- Only 1 blade
- A different 48 in blade length may be required
Grasscool's 48 in high lift blade is the best choice when you have confirmed that your mower uses a 16-3/4 in blade. The blade has a 5 point star center hole, a 2-1/2 in width and a 13/64 in thickness.
Its compatibility list includes Husqvarna Z248F, YTH2348, YTH24V48, YTH23V48, YTH2148, YTH24K48, Z248, YTH2448, Z4824, TS348XD, TS148 and TS248XD models. The list is broad, so the length check still carries most of the weight.
The key buying issue is length. This product replaces listed 180054 and related part numbers, but Grasscool also warns that some Husqvarna Z248F setups use a different blade length.
That warning is the main reason to measure before ordering.
The stated air lift is 1-7/32 in, which supports the high lift design for moving clippings toward a bagger or discharge path. Lift helps most when the deck and chute are clean and the grass is not matted down.
Compare your original blade before choosing it. Measure from tip to tip and check the center hole, because a blade that is close in length can still be the wrong part for the deck.
Pick this option when the 16-3/4 in measurement matches your mower. If your old blade is 16-5/8 in, compare the Apeixoto set or another exact replacement instead.
budrash 48" Deck Mower Blades: Best for a 3-pack with 180054 replacement numbers
- 3 blades
- 16-3/4 in length
- 5-point star center hole
- High-lift design
A 3-pack of high-lift blades for listed Husqvarna, Poulan, Craftsman and related 48 in decks. Match the original part number and mounting hole first.
Pros
- 3-blade pack
- Several listed replacement numbers
- Heavy-duty metal construction
Cons
- Compatibility varies by model
- Exact original part number still matters
budrash provides a 3 pack of high lift blades for listed 48 in decks, with a 16-3/4 in length, 2-1/2 in width, 0.2 in thickness and 5 point star center hole. The set replaces numbers including 180054, 173920 and 532180054.
The compatibility list includes selected Husqvarna YTH, GTH and YTA models, plus Poulan, Craftsman, Ariens and other mower brands. That wider list can help if you are matching an older tractor by part number rather than only by brand.
The high lift profile is intended to move clippings out of the deck or into a bagger. It suits homeowners who bag regularly or mow when grass is tall and airflow matters more than a mulching setup.
The package includes 3 replacement blades, which suits a full set change on a compatible deck. Replacing all three together can keep the cut more even than mixing one new blade with two worn ones.
The blades are described as heavy duty metal with a black coating. That coating is presented as protection for durability and rust resistance, though routine cleaning after wet mowing still helps the deck and blades last longer.
Choose budrash when the 16-3/4 in length and replacement numbers match your original blades. A broader compatibility list does not remove the need to check your exact mower.
Before fitting, confirm the air lift side faces toward the deck and follow the fastener steps for your mower. Wear gloves, secure the mower safely and keep the original blade nearby for a final length and hole comparison.
How to match Husqvarna mower decks with replacement blades
Match the deck size, blade length, mounting hole and part number before comparing brands. If your mower uses a smaller deck, compare these 14-inch mower blade options.
These four checks reduce the chance of ordering a blade that physically resembles the old one but does not fit.
Deck size is only the first check
A 48 in deck may use different blade lengths. The options here include 16-5/8 in and 16-3/4 in blades, so measure the old blade or confirm the mower manual before ordering.
A 46 in deck also needs its own blade arrangement. The Grasscool 46 in set uses 23 in blades with a 5-point star center hole, which is different from the 48 in options.
Confirm the mounting hole
A mounting hole must match the mower spindle. The products here use 5-point star or star-mount designs, but the exact shape still needs to match your original blade.
Do not force a blade onto a spindle. If the hole does not seat correctly, stop and compare the original part number and mower manual.
Check the blade direction
High-lift blades have a curved lift side that must face the deck in the correct direction. The cutting edge must also face the direction shown in the mower instructions.
For installation details, follow How to Change Lawn Mower Blades? and secure the mower before reaching under the deck.
High-lift, mulching or bagging blades: which type fits?
Choose a mulching blade for a compatible mulching setup, and choose high lift when your mower uses bagging or side discharge and the blade is approved for that deck. Style does not replace exact fit, since length, width, thickness and center hole decide whether a blade mounts safely.
A mulching blade cuts clippings into smaller pieces and drops them back on the lawn. That suits regular mowing when grass is dry enough and you take off a modest amount at a time.
A high lift blade creates stronger upward airflow under the deck. That airflow helps carry clippings to a bagger or out a side chute, which helps in tall, thick or damp grass where clippings pack down.
The Husqvarna 587199603 is the mulching option here. It is listed for compatible 22 in walk-behind mowers, so its job differs from the larger riding mower blades in this roundup.
Grasscool, Husqvarna, Apeixoto and budrash use high lift designs for bagging and discharge. Some Husqvarna high lift designs are also described as suitable for mulching, depending on the deck and setup you use.
Results still depend on the deck, chute and collection setup. A clean deck, a clear chute and a sharp edge all affect how well clippings travel.
Do not treat high lift as a universal upgrade. If your mower was set up for mulching or expects a specific profile, the approved blade is the safer choice.
Start with fit, then decide on style. Match part number, length and mounting hole first, then choose mulching or high lift based on whether you bag, discharge or return clippings.
How to care for Husqvarna lawn mower blades
Inspect the blade after mowing and remove packed grass from the deck when the mower is safely shut down. Look for bends, cracks, deep nicks and uneven wear along the cutting edge.
A dull blade tends to tear grass rather than slice it cleanly. That can leave ragged tips and make the lawn look uneven, even when the deck height is set correctly.
Sharpening can restore a dull cutting edge when the blade is structurally sound. Our guide on How Often Should You Sharpen Lawn Mower Blades? explains when sharpening makes sense and when replacement is the better move.
Use How to Sharpen Lawn Mower Blades? for the basic process. Remove material evenly and keep the two ends of the blade balanced, because an unbalanced blade can vibrate and stress the spindle.
After sharpening, check the blade for balance before fitting it. If one side feels heavier, remove a small amount of metal from that side and test again.
Clean the blade and deck after wet mowing, since trapped grass can hold moisture against the metal. A simple wipe down and dry storage helps limit rust and keeps the cutting edge easier to inspect.
Replace it if it is cracked, badly bent or cannot be balanced safely. A blade that has struck a rock or root may look straight but still be weakened, so err on the side of replacement when damage is clear.
Keep a spare blade or a matched set on hand if you mow often. That way a damaged blade does not force you to keep using a part that could damage the mower or leave a poor cut.
Which Husqvarna lawn mower blade should you choose?
Choose the Husqvarna 587199603 for a compatible 22 in walk-behind mower and the Grasscool 46 in set for a listed 46 in deck needing high lift. For 54 in decks, start with the Grasscool option when its measurements and replacement number match.
For 48 in decks, separate the 16-5/8 in and 16-3/4 in choices first. That split explains why several similar looking blades appear here and why you should measure the old blade before ordering.
Choose Apeixoto or the Husqvarna 3 pack when you need 3 blades, Grasscool when your length is 16-3/4 in, and budrash when its replacement numbers and fitment match. None removes the need for an exact fit check.
If you bag often, favour high lift designs that match your deck. If you mulch, start with a mulching blade made for your mower rather than forcing a bagging blade into the wrong setup.
If you are comparing other brands, see best Ryobi lawn mower blades and best Toro lawn mower blades. The rule stays the same: match part number and physical measurements before you order.
A final check takes a few minutes. Confirm mower model, deck size, blade length, center hole shape and original part number, then compare them with the listing.
If one detail is missing, check the owner manual or measure again.
Our top 3 picks at a glance
-
1
Best for compatible 22 in walk-behind mowers
Husqvarna 587199603 Lawn Mower 22-in Deck Mulching
9.7/10 our score
See it on Amazon -
2
Best for 46 in bagging and side discharge
Grasscool 46 inch Mower High Lift Blades
9.6/10 our score
See it on Amazon -
3
Best for listed 54 in zero-turn decks
Grasscool 54 inch Mower High Lift Blades
9.5/10 our score
See it on Amazon
Frequently asked questions
How do I choose Husqvarna lawn mower blades?
Choose Husqvarna lawn mower blades by matching the mower model, deck size, original part number, blade length and mounting-hole shape. A 48 in deck can use different blade lengths, so deck size alone is not enough.
Check the owner manual and compare the old blade before ordering.
What size blades fit a Husqvarna 48 inch deck?
Husqvarna 48 in decks can use different blade sizes and part numbers. The products here include 16-5/8 in and 16-3/4 in options, plus a 3-piece Husqvarna set for listed models.
Measure the original blade and verify the center hole before choosing.
Are high-lift blades good for bagging?
Yes, high-lift blades are designed to move more clippings through the mower deck toward a bagger or side discharge. They still need the correct length, width, thickness and mounting hole.
A high-lift blade that does not fit your deck is not a safe substitute.
How often should Husqvarna mower blades be replaced?
Replace a Husqvarna mower blade when it is damaged, badly worn, difficult to balance or no longer produces a clean cut after sharpening. Inspect it after contact with rocks or roots.
A blade that is bent or cracked should be replaced rather than reshaped.
Can I install Husqvarna mower blades myself?
You can install mower blades yourself if you can safely isolate the mower, support it securely and follow the owner's manual. Wear gloves while handling the blade, confirm the cutting edge faces the correct direction and tighten the fastener as specified.
Read How to Change Lawn Mower Blades? before starting.
