Best picks

9 Best Lawn-Boy Mower Blades (November 2026)

Updated on · By the Over Top Info team

The best Lawn Boy mower blades include the MowerPartsGroup Bad Boy Zero Turn Mower 54'' for 54 inch Bad Boy decks, the Oregon 22 Inch Lawn Mower Blade for 22 inch Toro and Lawn-Boy mowers, and the BCQNXX 038-6050-00 High Lift Mower Blades Set for 60 inch high lift decks.

On this page (9 sections)
  1. The best lawn boy mower blades for each deck size
  2. How do the best lawn boy mower blades compare?
  3. How we compared these blades
  4. What size blade does a Lawn-Boy mower take?
  5. What part number should I match on my old blade?
  6. Should I choose mulching or high lift blades?
  7. How do I check blade fit before I order?
  8. When should I sharpen or replace a mower blade?
  9. Which of the best lawn boy mower blades should you buy?

The best lawn boy mower blades for most walk-behind mowers are the Oregon 22 Inch blade and the genuine Lawn-Boy 21 inch mulching blade. They match the deck sizes and mounting patterns most Lawn-Boy owners actually have.

Larger zero turn decks need a different blade length, and this list covers those sizes too.

Our score weighs specs, features and buyer feedback against what you're shopping for. We compared blade length, width, thickness, center hole size and replaced part numbers across all nine picks.

We looked at which models each blade lists, so you can match your mower without guessing.

Start by finding your deck size. A 21 or 22 inch walk-behind mower takes a single blade, while 42, 48, 54 and 60 inch decks take sets of three or more.

The center hole matters just as much as length. A blade that is the right length but has the wrong hole will not mount safely.

If you plan to do the swap yourself, our guide on How to Change Lawn Mower Blades? walks through the job step by step. For removal help, see How to Remove a Lawn Mower Blade? before you start.

Those two guides cover the safety steps that apply to every blade in this list.

Our picks at a glance

  1. 1 MowerPartsGroup Bad Boy Zero Turn Mower 54''
    Best for 54 inch Bad Boy decks

    MowerPartsGroup Bad Boy Zero Turn Mower 54''

    9.7/10 our score

    See it on Amazon
  2. 2 Oregon 22 Inch Lawn Mower Blade
    Best for 22 inch Toro and Lawn-Boy mowers

    Oregon 22 Inch Lawn Mower Blade

    9.6/10 our score

    See it on Amazon
  3. 3 BCQNXX 038-6050-00 High Lift Mower Blades Set
    Best for 60 inch high lift decks

    BCQNXX 038-6050-00 High Lift Mower Blades Set

    9.5/10 our score

    See it on Amazon
  1. 4Oregon 54 Inch Lawn Mower Blades

    Oregon 54 Inch Lawn Mower Blades

    Best Oregon pick for 54 inch decks
    Check it
  2. 5MaxPower 561149B USA MADE 3 Blade Set

    MaxPower 561149B USA MADE 3 Blade Set

    Best USA made set for MZ Magnum
    Check it
  3. 6TENGMUJX 038-4825-00 Mower High Lift Blades Fit

    TENGMUJX 038-4825-00 Mower High Lift Blades Fit

    Best for 48 inch MZ and MZ Magnum
    Check it
  4. 7JYLEYJ 038-4221-00 High Lift Blades FitCheck it
  5. 8MowerPartsGroup

    MowerPartsGroup

    Best value six pack for 60 inch decks
    Check it
  6. 9Lawn-Boy Lawn Boy 133-8182-03p Mulching Mower Blade

    Lawn-Boy Lawn Boy 133-8182-03p Mulching Mower Blade

    Best genuine Lawn-Boy 21 inch blade
    Check it

The best lawn boy mower blades for each deck size

The top picks split by deck size, not by brand loyalty. Walk-behind owners should focus on the 21 and 22 inch singles.

Zero turn owners should focus on the 42 to 60 inch sets. Mixing those groups is the most common way to order the wrong blade.

1

MowerPartsGroup Bad Boy Zero Turn Mower 54'': Best for 54 inch Bad Boy decks

MowerPartsGroup Bad Boy Zero Turn Mower 54'', Lawn Boy mower blades
9.7/10Our score
  • Three Reaper blades for 54 inch decks
  • 18-3/4 in length, 2-1/2 in width
  • 5/8 in center hole
  • 0.204 in thickness
  • Powder coated red, made in USA

A three blade set for 54 inch Bad Boy decks, built to replace 038-0005-00 and 038-0001-00.

See it on Amazon

Pros

  • Three blades in one set
  • Matches listed 54 inch Bad Boy models
  • Made in USA

Cons

  • Only fits listed 54 inch decks
  • Must verify model and part numbers before ordering

This MowerPartsGroup set suits owners of 54 inch Bad Boy decks who want three matching blades at once. Each blade is 18-3/4 in long, 2-1/2 in wide, with a 5/8 in center hole.

The thickness is 0.204 in, which sits in the middle of the 54 inch group here and gives a sense of the steel weight behind a full set.

It replaces 038-0005-00 and 038-0001-00, and it lists a long run of Bad Boy models. That includes MZ Magnum, MZ, ZT Elite, ZT Avenger, Maverick, Revolt, Rebel, Rogue and Outlaw models, plus CZT and Walk-Behind variants.

Check your model, serial and part numbers before you order, since fitment depends on the exact deck and year range.

The powder coated red finish comes off on the first cut and reveals the sharpened edge. MowerPartsGroup says these are made in the USA.

Against the other 54 inch sets, this one scores highest because it covers the widest model list and replaces two OEM numbers, which helps when your old blade stamp is hard to read.

MowerPartsGroup Bad Boy Zero Turn Mower 54''Check it on Amazon
2

Oregon 22 Inch Lawn Mower Blade: Best for 22 inch Toro and Lawn-Boy mowers

Oregon 22 Inch Lawn Mower Blade, Lawn Boy mower blades
9.6/10Our score
  • For 22 in deck, 21-11/16 in blade length
  • 7/16 in center hole
  • 2.25 in width, 0.149 in thickness
  • Gator design for mulching
  • Replaces 131-4547-03, 108-9764, 59534

A single Gator blade for 22 inch Toro and Lawn-Boy models, designed to recut clippings for mulch.

See it on Amazon

Pros

  • Direct fit for listed Lawn-Boy 10654 to 10656
  • Gator design for finer mulch
  • Single blade replacement

Cons

  • Only one blade per pack
  • Center hole differs from larger blades here

This Oregon blade suits Toro and Lawn-Boy owners with a 22 inch deck. It is 21-11/16 in long for a 22 in deck, 2.25 in wide, 0.149 in thick, with a 7/16 in center hole.

That smaller center hole is the key detail, since it differs from every larger blade in this group and will not interchange with a 5/8 in spindle.

It lists Lawn-Boy 10654, 10655 and 10656, plus a long run of Toro models from the 20070 through 20338 series. It replaces 131-4547-03, 108-9764 and 59534.

Oregon says the steel is built to hold sharpness longer, and the Gator design recuts clippings into finer mulch rather than leaving longer pieces on the lawn.

This is a single blade, not a set, so it suits a walk-behind mower that uses one blade. Oregon says the design helps with mulching, bagging and side discharge.

Against the Lawn-Boy 21 inch blade, this Oregon pick gives you more spec detail and a wider cross reference list, which makes checking fit easier before you buy.

Oregon 22 Inch Lawn Mower BladeCheck it on Amazon
3

BCQNXX 038-6050-00 High Lift Mower Blades Set: Best for 60 inch high lift decks

BCQNXX 038-6050-00 High Lift Mower Blades Set, Lawn Boy mower blades
9.5/10Our score
  • Three high lift blades for 60 in decks
  • 20-1/2 in length, 2-1/2 in width
  • 5/8 in center hole, 0.240 in thickness
  • 29/32 in air lift
  • Replaces 038-2007-00, 038-6050-00, 038-6060-00, 038-6002-00

A three pack of 60 inch high lift blades for listed Bad Boy, Toro, Exmark, Gravely and Hustler decks.

See it on Amazon

Pros

  • Three blades for 60 in decks
  • High lift design with stated air lift
  • Wide list of replaced part numbers

Cons

  • Too long for smaller decks
  • Check original part number before ordering

This BCQNXX set suits owners of 60 inch decks who want a high lift blade. Each blade is 20-1/2 in long, 2-1/2 in wide, 0.240 in thick, with a 5/8 in center hole.

The stated air lift is 29/32 in, and the cutting edge length is 7-1/16 in, so the lift numbers are clear enough to compare against other high lift sets.

It replaces 038-2007-00, 038-6050-00, 038-6060-00 and 038-6002-00, plus part numbers from Exmark, Toro, Hustler, Gravely, Ariens, Dixie Chopper and Dixon. The model list includes Bad Boy ZT60, CZT60, Maverick, Avenger and several Hustler models, plus Gravely, Toro and Exmark 60 inch decks.

That breadth suits a mower whose original blade came from a related brand.

The pack has three blades, which matches a three spindle 60 inch deck. High lift blades move clippings upward under the deck, which helps with discharge in taller grass.

Against the six pack MowerPartsGroup set, this one costs less per blade if you only need one set, but it gives you no spares for a mid season swap.

BCQNXX 038-6050-00 High Lift Mower Blades SetCheck it on Amazon
4

Oregon 54 Inch Lawn Mower Blades: Best Oregon pick for 54 inch decks

Oregon 54 Inch Lawn Mower Blades, Lawn Boy mower blades
9.2/10Our score
  • Three pack for 54 in decks
  • 18-3/4 in blade length
  • 5/8 in center hole, 2.5 in width
  • 0.203 in thickness
  • Replaces Bad Boy OEM 038-0005-00

An Oregon three pack for 54 inch Bad Boy decks, with the same 18-3/4 in length as other 54 inch sets here.

See it on Amazon

Pros

  • Three blades in one pack
  • Matches 038-0005-00 replacement
  • Oregon steel build

Cons

  • Only for listed 54 inch models
  • Similar size to competing 54 inch sets

This Oregon three pack suits 54 inch Bad Boy deck owners who prefer the Oregon name. Each blade is 18-3/4 in long, 2.5 in wide, 0.203 in thick, with a 5/8 in center hole.

Those numbers match the other 54 inch sets here almost exactly, so the choice comes down to brand, model list and which OEM numbers you need to replace.

It replaces Bad Boy OEM 038-0005-00 and lists MZ Magnum, MZ Rambler, MZ, CZT, CZT Elite, ZT Elite, ZT Avenger, Outlaw, Maverick, Revolt, Rebel, Rogue and Walk-Behind models. Oregon says the steel holds sharpness longer and gives a clean, even cut with smooth grass discharge.

The item model number 653642 and the 7.39 pound total weight also help you confirm you have the right pack.

The trade-off against the top ranked MowerPartsGroup set is narrow. This pack replaces one OEM number instead of two, and its model list covers slightly fewer years on some models.

If your mower is on this list, it is a solid match for a 54 inch deck and a straightforward way to buy three matched blades.

Oregon 54 Inch Lawn Mower BladesCheck it on Amazon
5

MaxPower 561149B USA MADE 3 Blade Set: Best USA made set for MZ Magnum

MaxPower 561149B USA MADE 3 Blade Set, Lawn Boy mower blades
9.0/10Our score
  • Three blades for 54 in Bad Boy mowers
  • 18-3/4 in length, 2-1/2 in width
  • 5/8 in center hole
  • Replaces OEM 038-0005-00
  • Made in USA, powder coated

A USA made three blade set for 54 inch Bad Boy mowers, including the MZ Magnum.

See it on Amazon

Pros

  • Three blades for 54 in cut
  • Sharpened during manufacturing
  • Made in USA

Cons

  • Only fits 54 in Bad Boy decks
  • Powder coating comes off on first cut

This MaxPower set suits 54 inch Bad Boy owners, including MZ Magnum owners. It has three blades, each 18-3/4 in long and 2-1/2 in wide, with a 5/8 in center hole.

MaxPower says these blades are made to meet or exceed OEM specifications, which is a useful claim to weigh against the exact dimensions listed here.

It replaces OEM 038-0005-00 and fits the MZ Magnum. The blades are sharpened during the manufacturing process and then powder coated for protection.

That coating comes off on the first cut to reveal the sharpened edge, so expect the finish to change after the first mow. The set weighs 7.71 pounds in total, close to the other 54 inch three packs.

Against the Oregon 54 inch pack, this set gives you the same dimensions and the same replaced part number. The difference is origin and finish, since MaxPower says these are made in the USA and proudly made for this model.

Check your owner's manual and match the OEM number on your old blade before you order.

MaxPower 561149B USA MADE 3 Blade SetCheck it on Amazon
6

TENGMUJX 038-4825-00 Mower High Lift Blades Fit: Best for 48 inch MZ and MZ Magnum

TENGMUJX 038-4825-00 Mower High Lift Blades Fit, Lawn Boy mower blades
8.7/10Our score
  • For Bad Boy 48 in MZ and MZ Magnum
  • 16-1/2 in length, 2-1/2 in width
  • 5/8 in center hole, 0.203 in thickness
  • Replaces Bad Boy 038-4825-00

High lift blades sized for 48 inch MZ and MZ Magnum decks, replacing 038-4825-00.

See it on Amazon

Pros

  • Sized for 48 in decks
  • High lift design
  • Direct OEM number match

Cons

  • Will not fit 48 in or 60 in decks
  • Check deck size before ordering

This TENGMUJX set suits Bad Boy MZ and MZ Magnum owners with a 48 inch deck. Each blade is 16-1/2 in long, 2-1/2 in wide, 0.203 in thick, with a 5/8 in center hole.

Those dimensions sit between the 42 inch and 54 inch sets in this group, so measuring the deck is the fastest way to confirm this is your size.

It replaces Bad Boy 038-4825-00 and is listed for MZ and MZ Magnum 48 inch cuts. The high lift design suits buyers who want stronger clipping movement under the deck.

That can help with discharge when grass is thick or damp, since the lift pulls clippings up and moves them toward the chute more actively.

The trade-off is fit. These blades will not work on a 42 or 60 inch deck, even though the center hole matches.

Measure your deck width first. If your deck is 48 inches, this is the only pick here built for that size, and the direct OEM number match makes the check simple.

TENGMUJX 038-4825-00 Mower High Lift Blades FitCheck it on Amazon
7

JYLEYJ 038-4221-00 High Lift Blades Fit: Best for 42 inch decks

JYLEYJ 038-4221-00 High Lift Blades Fit, Lawn Boy mower blades
8.5/10Our score
  • Three pack for 42 in decks
  • 14-1/2 in length, 2-1/2 in width
  • 5/8 in center hole, 0.197 in thickness
  • Replaces 038-4221-00 and 038-4226-00
  • Fits Bad Boy MZ, MZ Magnum, Rambler and CZT

A three pack of high lift blades for 42 inch Bad Boy decks, with 14-1/2 in blades.

See it on Amazon

Pros

  • Three blades for 42 in decks
  • Replaces two listed OEM numbers
  • Fits several 42 in series

Cons

  • Smallest blades in this group
  • Only fits listed 42 in models

This JYLEYJ three pack suits owners of 42 inch Bad Boy decks. Each blade is 14-1/2 in long, 2-1/2 in wide, 0.197 in thick, with a 5/8 in center hole.

It is the smallest blade in this group, which is why deck size checks matter so much before you place an order.

It replaces 038-4221-00 and 038-4226-00, and it fits Bad Boy MZ, MZ Magnum, Rambler and CZT series mowers with a 42 inch deck. It also lists replacement numbers from Gravely, Ariens, Dixie Chopper and Stens, which widens the chance of a match if your mower was sold under a related name.

The package dimensions and 5.51 pound weight confirm this is a lighter set than the 60 inch options.

The pack has three blades, so it covers a full three spindle deck. The thinner 0.197 in steel is lighter than the 60 inch blades here.

Against the 48 inch TENGMUJX set, this one suits a smaller deck and a smaller yard. Confirm your deck is 42 inches before you order.

JYLEYJ 038-4221-00 High Lift Blades FitCheck it on Amazon
8

MowerPartsGroup: Best value six pack for 60 inch decks

MowerPartsGroup, Lawn Boy mower blades
8.2/10Our score
  • Six Reaper blades, 20-1/2 in length
  • 2-1/2 in width, 5/8 in center hole
  • 0.250 in thickness, hi-lift
  • Powder coated red, made in USA
  • For 60 in Hustler, Bad Boy, Gravely and Toro decks

Six USA made hi-lift blades for 60 inch decks, for buyers who want spares on hand.

See it on Amazon

Pros

  • Six blades per pack
  • Thicker 0.250 in steel
  • Made in USA

Cons

  • Large pack may be more than you need
  • Must check models in the description

This MowerPartsGroup six pack suits 60 inch deck owners who want spares on hand. Each blade is 20-1/2 in long, 2-1/2 in wide, 0.250 in thick, with a 5/8 in center hole.

That thickness is the heaviest in this group, and the 19 pound total weight reflects six blades rather than three.

The blades are hi-lift, powder coated red and made in the USA. This pack lists Hustler, Bad Boy, Gravely and Toro 60 inch decks, and it tells you to check the models in the description.

Six blades means two full sets for a three spindle deck, so you can keep a fresh set ready while the first set is on the mower.

The trade-off is quantity. If you only need one replacement set, a three pack is simpler and takes less storage space.

If you mow a large property or run more than one mower, the spare set saves a second order later. Check model, serial and part numbers before you buy, since fitment is listed in the description rather than a short model list.

MowerPartsGroupCheck it on Amazon
9

Lawn-Boy Lawn Boy 133-8182-03p Mulching Mower Blade: Best genuine Lawn-Boy 21 inch blade

Lawn-Boy Lawn Boy 133-8182-03p Mulching Mower Blade, Lawn Boy mower blades
8.0/10Our score
  • Lawn-Boy 133-8182-03p mulching blade
  • For walk-behind mowers, 21 in
  • 20.95 in cutting width
  • Single blade, part number 133-8182-03P

The genuine Lawn-Boy mulching blade for 21 inch walk-behind mowers, sold as a single blade.

See it on Amazon

Pros

  • Genuine Lawn-Boy part number
  • Sized for 21 in walk-behind mowers
  • Mulching design

Cons

  • Single blade only
  • Limited spec detail for comparison

This genuine Lawn-Boy blade suits walk-behind mower owners who want the factory part. It is the Lawn-Boy 133-8182-03p mulching blade for 21 in walk-behind mowers, with a 20.95 in cutting width.

The part number is 133-8182-03P, which is the detail to match against the stamp on your old blade.

This is a single blade for a single blade mower, not a set for a zero turn deck. The mulching design suits buyers who want clippings returned to the lawn as feed.

If you prefer bagging or side discharge, check what your mower deck supports before you choose a mulching blade, since the deck cover and chute setup affect how clippings leave the deck.

Against the Oregon 22 inch blade, this one wins on brand match and loses on spec detail. The Oregon blade lists its center hole, width and thickness, while this blade lists mainly the part number and cutting width.

If your old blade has 133-8182-03P stamped on it, this is the simplest match and the least guesswork.

Lawn-Boy Lawn Boy 133-8182-03p Mulching Mower BladeCheck it on Amazon

How do the best lawn boy mower blades compare?

The blades compare mainly by deck size and center hole. The 21 and 22 inch singles use a smaller mounting pattern, while the 42 to 60 inch sets use a 5/8 in center hole.

A blade from one group will not fit a mower from the other group.

ProductBest forBlade LengthWidthCenter HoleOur score
MowerPartsGroup Bad Boy Zero Turn Mower 54''54 inch Bad Boy decks18-3/4 in2-1/2 in5/8 in9.7
Oregon 22 Inch Lawn Mower Blade22 inch Toro and Lawn-Boy mowers21-11/16 in2.25 in7/16 in9.6
BCQNXX 038-6050-00 High Lift Mower Blades Set60 inch high lift decks20-1/2 in2-1/2 in5/8 in9.5
Oregon 54 Inch Lawn Mower BladesOregon pick for 54 inch decks18-3/4 in2.5 in5/8 in9.2
MaxPower 561149B USA MADE 3 Blade SetUSA made set for MZ Magnum18-3/4 in2-1/2 in5/8 in9.0
TENGMUJX 038-4825-00 Mower High Lift Blades Fit48 inch MZ and MZ Magnum16-1/2 in2-1/2 in5/8 in8.7
JYLEYJ 038-4221-00 High Lift Blades Fit42 inch decks14-1/2 in2-1/2 in5/8 in8.5
MowerPartsGroupvalue six pack for 60 inch decks20-1/2 in2-1/2 in5/8 in8.2
Lawn-Boy Lawn Boy 133-8182-03p Mulching Mower Bladegenuine Lawn-Boy 21 inch blade8.0

Thickness ranges from 0.149 in on the Oregon 22 inch blade to 0.250 in on the MowerPartsGroup six pack. Thicker steel is heavier and may hold an edge longer, but it does not make a blade fit a deck it was not sized for.

Length and center hole decide fit first.

Pack size also differs a lot. Two picks are single blades for walk-behind mowers.

The rest are sets of three, except for one six pack. Count your spindles before you order.

Most zero turn decks in this group take three blades.

Which spec should you check first?

Check center hole size before length. A blade can be close in length yet still fail to mount if the hole is wrong.

After the hole, check length against deck width, then check the replaced part number.

How we compared these blades

We compared blade length, width, thickness and center hole size for every pick. We checked replaced part numbers against listed models, since that is how you confirm fit.

We also checked pack size, because a single blade and a six pack solve different needs.

We did not test these blades hands on. We relied on specs and model lists from the brands.

Where a brand makes a claim, such as Oregon on edge life or MaxPower on OEM standards, we attribute it to that brand.

Our score weighs specs, features and buyer feedback against what you're shopping for. A blade scores higher when its specs are clear, its model list is wide and its size matches a common deck.

That is why the 54 inch sets rank near the top, since many decks use that size.

What size blade does a Lawn-Boy mower take?

A walk-behind Lawn-Boy mower usually takes a 21 or 22 inch single blade. Check your deck width and the part number on your old blade.

The Oregon 22 inch blade lists Lawn-Boy 10654 to 10656, while the Lawn-Boy 133-8182-03p fits 21 inch walk-behind mowers.

How wide is your deck?

Measure across the deck shell, not the blade. A 22 inch deck takes a 21-11/16 in blade, since the blade must clear the deck walls.

That small gap is normal, and it does not mean you ordered the wrong size.

What about the center hole?

The Oregon 22 inch blade has a 7/16 in center hole. The larger sets here use 5/8 in.

If your old blade has a smaller hole, do not force a larger blade onto the spindle.

What part number should I match on my old blade?

Match the part number stamped on your old blade first. The Oregon 22 inch blade replaces 131-4547-03, 108-9764 and 59534.

The 54 inch sets replace 038-0005-00, and some also replace 038-0001-00.

How do I find the part number?

Look on the flat center section of the blade, near the mounting hole. Wipe off grass and dirt first.

If the stamp is worn off, use your mower model number and check the manual.

What if the number is worn off?

Measure blade length, width and center hole size. Compare those numbers with the specs here.

Then check the model list for your mower. A match on all three is safer than a match on length alone.

Should I choose mulching or high lift blades?

Mulching blades are designed to recut clippings into finer pieces that return to the lawn. The Oregon 22 inch blade and the Lawn-Boy 21 inch blade both use a mulching design.

That suits buyers who mow often and want fewer clippings to clean up.

High lift blades, like the 42, 48 and 60 inch sets here, move clippings upward under the deck. That helps with discharge and bagging in thicker grass.

If you want best lawn mower blades for mulching for a larger deck, compare the lift and wing design on each set.

Which suits damp grass?

High lift blades usually handle damp or tall grass better, since they move clippings out faster. Mulching blades work best when you mow frequently and keep the grass dry.

Your mowing habit matters more than the blade name.

Can I switch blade types?

You can switch if the blade length, center hole and deck clearance match. Check that your deck can handle the airflow from a high lift blade.

When in doubt, keep the blade type your mower started with.

How do I check blade fit before I order?

Check three things in order. First, confirm deck width.

Second, confirm center hole size. Third, confirm the replaced part number or model list.

If all three match, you have a strong fit.

Why does the manual matter?

Your manual lists the correct blade part number for your model and year. MowerPartsGroup and Oregon both tell you to check the manual and part numbers.

That advice applies to every blade in this list.

What if my mower is an older Lawn-Boy?

Older models may not appear on newer replacement lists. Measure the blade and spindle hole, then match those numbers.

Our guide to best ryobi lawn mower blades shows the same checking method for a different brand.

When should I sharpen or replace a mower blade?

Sharpen a blade when the edge feels dull but the steel is still sound. Replace it when the edge is bent, cracked, chipped or too thin.

Our guide on How Often Should You Sharpen Lawn Mower Blades? helps you set a schedule.

How do I know if a blade is too thin?

Compare the edge thickness with a new blade if you have one. Heavy sharpening removes steel and can weaken the blade.

If the blade bends easily by hand, replace it.

How do I learn to sharpen at home?

Our guide on How to Sharpen Lawn Mower Blades? covers the basic method and safety steps. Balance the blade after sharpening, since an unbalanced blade can damage the spindle.

Which of the best lawn boy mower blades should you buy?

Pick the Oregon 22 inch blade if you have a 22 inch walk-behind mower and want a mulching design. Pick the Lawn-Boy 133-8182-03p if your old blade has that exact part number.

For 54 inch decks, pick the MowerPartsGroup set for the widest model list or the Oregon pack for the Oregon name.

Match deck size, center hole and part number before you order. That rule matters more than brand or pack size.

If you confirm those three details, any blade in this group that fits your deck should serve you well.

Our top 3 picks at a glance

  1. 1 MowerPartsGroup Bad Boy Zero Turn Mower 54''
    Best for 54 inch Bad Boy decks

    MowerPartsGroup Bad Boy Zero Turn Mower 54''

    9.7/10 our score

    See it on Amazon
  2. 2 Oregon 22 Inch Lawn Mower Blade
    Best for 22 inch Toro and Lawn-Boy mowers

    Oregon 22 Inch Lawn Mower Blade

    9.6/10 our score

    See it on Amazon
  3. 3 BCQNXX 038-6050-00 High Lift Mower Blades Set
    Best for 60 inch high lift decks

    BCQNXX 038-6050-00 High Lift Mower Blades Set

    9.5/10 our score

    See it on Amazon

Frequently asked questions

How do I know which Lawn-Boy blade size I need?

Measure your deck width and check the center hole size on your old blade. Most walk-behind Lawn-Boy mowers here use about 21 to 22 inch blades, while larger decks need 42 to 60 inch sets.

Match the part number on the old blade before you order.

Can I use a Toro blade on a Lawn-Boy mower?

Some Oregon blades list both Toro and Lawn-Boy models, like the 22 inch blade for Lawn-Boy 10654 to 10656. Check the model list and the center hole size, since a shared deck width does not always mean a shared mounting pattern.

How often should mower blades be replaced?

Inspect blades as you check them for sharpening. Replace a blade when the edge is bent, cracked, heavily nicked or too thin to hold an edge.

Sharpening extends life, but it does not fix a damaged blade.