Best picks

9 Best John Deere Lawn Mower Blades (November 2026)

Updated on · By the Over Top Info team

The best best lawn mower blades for john deere include the John Deere Original Equipment Mower Blade Kit for OEM fit on 42 in decks, the BCQNXX AM141034 Lawn Mower High Lift Blade for high lift discharge on 42 in decks, and the GICOOL AM137327 High Lift Mower Blades for 40MnB steel high lift cutting.

On this page (8 sections)
  1. How we compared these John Deere replacement blades
  2. The best lawn mower blades for John Deere, by deck and use
  3. What deck size do I have: 42 in or 48 in?
  4. Which John Deere blade style fits how you mow?
  5. How do I check OEM numbers and center holes?
  6. How do I install and care for new mower blades?
  7. What are the trade offs between OEM and aftermarket blades?
  8. Verdict: which John Deere mower blades should you buy?

The best lawn mower blades for John Deere for most owners is the John Deere Original Equipment Mower Blade Kit GY20850, because the OEM number matches a wide list of 42 in tractors. If you side discharge tall grass, a high lift 2 pack will move clippings better.

If you mulch, a Gator or mulching set will cut clippings smaller.

Our score weighs specs, features and buyer feedback against what you're shopping for. That means OEM fit, deck size, blade style and stated dimensions matter more here than a generic promise of a clean cut.

Start by finding your deck size and OEM number. A 42 in deck uses 2 long blades near 21 in.

A 48 in deck uses 3 shorter blades near 17 in. That one check rules out half of this list right away.

If the deck is loud, shakes or leaves a ragged edge, read How to Change Lawn Mower Blades? before you order. If you need the removal steps first, How to Remove a Lawn Mower Blade? covers the safe order of work.

Our picks at a glance

  1. 1 John Deere Original Equipment Mower Blade Kit
    Best for OEM fit on 42 in decks

    John Deere Original Equipment Mower Blade Kit

    9.7/10 our score

    See it on Amazon
  2. 2 BCQNXX AM141034 Lawn Mower High Lift Blade
    Best for high lift discharge on 42 in decks

    BCQNXX AM141034 Lawn Mower High Lift Blade

    9.6/10 our score

    See it on Amazon
  3. 3 GICOOL AM137327 High Lift Mower Blades
    Best for 40MnB steel high lift cutting

    GICOOL AM137327 High Lift Mower Blades

    9.5/10 our score

    See it on Amazon
  1. 4John Deere OEM High Lift Mower Blade

    John Deere OEM High Lift Mower Blade

    Best for OEM high lift on 48 in decks
    Check it
  2. 5JXJKCZ GY20850 GX22151 Gator Mulching Blades Fits

    JXJKCZ GY20850 GX22151 Gator Mulching Blades Fits

    Best for Gator mulching on 42 in decks
    Check it
  3. 6KANXAJJY

    KANXAJJY

    Best for X300 and ZTrak 42 in decks
    Check it
  4. 7Apeixoto 2PCS 3-N-1 Blades Fit

    Apeixoto 2PCS 3-N-1 Blades Fit

    Best for 3-N-1 use on 42 in decks
    Check it
  5. 8Apeixoto 3PCS GX21784 Blades Fit

    Apeixoto 3PCS GX21784 Blades Fit

    Best for 3-in-1 blades on 48 in decks
    Check it
  6. 9GICOOL GY20852 Mower Mulching Blades for JD

    GICOOL GY20852 Mower Mulching Blades for JD

    Best for mulching, bagging and discharge on 48 in decks
    Check it

How we compared these John Deere replacement blades

We compared length, width, thickness, center hole shape, blade style and OEM replacement numbers. We also checked which models each blade claims to fit, because deck size alone does not prove fit.

A blade can be the right length and still fail if the center hole shape is wrong. Most picks here use a 7 point star hole, but one pick uses a 51/64 in hole.

Measure your old blade before you choose.

Blade style is the next split. High lift blades have taller lift wings for discharge.

Mulching and Gator blades have a curved profile to cut clippings again. 3-N-1 blades aim for mulching, bagging and discharge in one set.

Thickness matters in daily use in a different way from length. A thicker blade, such as the 0.197 in KANXAJJY set, presents a heavier section at the cutting edge and at the center hole.

A thinner blade, such as the 0.157 in BCQNXX set, relies more on its profile and coating for daily durability. Neither thickness alone proves a better cut.

The match to your deck, hole shape and mowing style decides which one fits your work.

We also separated 42 in and 48 in systems before scoring style. A 42 in deck spreads the cut across two blades near 21 in long.

A 48 in deck spreads the cut across three blades near 17 in long. That changes overlap, balance and how a single blade change affects the pattern.

Scoring a 17 in blade against a 21 in blade without that split would hide the real fit question.

ProductBest forOEM Part NumberDeck FitMaterialOur score
John Deere Original Equipment Mower Blade KitOEM fit on 42 in decksGY2085042 in models listedSteel9.7
BCQNXX AM141034 Lawn Mower High Lift Bladehigh lift discharge on 42 in decks9.6
GICOOL AM137327 High Lift Mower Blades40MnB steel high lift cutting9.5
John Deere OEM High Lift Mower BladeOEM high lift on 48 in decksAlloy Steel9.3
JXJKCZ GY20850 GX22151 Gator Mulching Blades FitsGator mulching on 42 in decks9.1
KANXAJJYX300 and ZTrak 42 in decks8.8
Apeixoto 2PCS 3-N-1 Blades Fit3-N-1 use on 42 in decks42 in8.6
Apeixoto 3PCS GX21784 Blades Fit3-in-1 blades on 48 in decks48 in8.4
GICOOL GY20852 Mower Mulching Blades for JDmulching, bagging and discharge on 48 in decks8.1

The best lawn mower blades for John Deere, by deck and use

The picks below run from the highest score to the lowest score. Each write up names who it suits, what the size means in daily use, and where it gives ground to another pick.

1

John Deere Original Equipment Mower Blade Kit: Best for OEM fit on 42 in decks

John Deere Original Equipment Mower Blade Kit, best lawn mower blades for john deere
9.7/10Our score
  • OEM part number GY20850
  • Fits 102, 105, 115, 125, 135 and D and LA 42 in models
  • Steel construction
  • John Deere 6 month warranty description

An OEM GY20850 kit for John Deere 102, 105, 115, 125, 135, LA100 to LA135 and D100 to D130 models.

See it on Amazon

Pros

  • OEM part number GY20850
  • Wide 42 in model list
  • Steel blade

Cons

  • 42 in fit only in this list
  • Check deck size before order

This OEM kit suits owners who want the exact GY20850 number for a 42 in John Deere tractor. It fits the 102, 105, 115, 125 and 135, plus LA100 to LA135 and D100 to D130 models in the stated list.

Steel construction and a 6 month warranty description support its top score.

In daily use, the main win is fit confidence. You compare one OEM number to your old blade instead of sorting through a long aftermarket cross reference list.

That matters when you want a straightforward swap at the start of the season. The listed package quantity of 1 also means you should confirm whether your deck needs a single kit or a paired set before you plan the job.

The trade off is scope. This pick is for 42 in decks only, so 48 in owners should look at the OEM high lift kit or the 48 in mulching sets below.

For another 42-inch deck fit, compare Craftsman 42-inch deck blades.

It also does not promise a mulching profile, so side discharge users may prefer a high lift blade with stated air lift.

John Deere Original Equipment Mower Blade KitCheck it on Amazon
2

BCQNXX AM141034 Lawn Mower High Lift Blade: Best for high lift discharge on 42 in decks

BCQNXX AM141034 Lawn Mower High Lift Blade, best lawn mower blades for john deere
9.6/10Our score
  • 2 pack high lift blades
  • 21-1/4 in length, 2-3/4 in width
  • Replaces AM141034, AM141032, M154062, AM137327, M154061
  • 7 point star center hole

A 2 pack of 21-1/4 in high lift blades for 42 in John Deere decks, made for tall grass and dense vegetation.

See it on Amazon

Pros

  • 2 pack for 42 in decks
  • High lift for discharge
  • Replaces five OEM numbers

Cons

  • High lift not ideal for mulching
  • Check center hole shape

This 2 pack suits 42 in John Deere owners who side discharge or bag tall grass. Each blade measures 21-1/4 in long, 2-3/4 in wide and 0.157 in thick, with a 7/8 in 7 point star center hole.

BCQNXX says the heavy duty metal and powder coat finish help resist rust.

The high lift design has an extended cutting surface for cutting efficiency in tall grass and dense vegetation. In daily use, that lift helps carry clippings out of the deck instead of dropping them back under the mower.

The replacement list covers five OEM numbers, including AM141034 and AM137327, which widens the model range to LT, SST, X and Z series in the stated list.

The trade off is mulching quality. A high lift blade is built to move clippings, not to chop them fine.

If you mulch most of the time, the Gator or 3-N-1 picks below will suit your discharge needs better than this discharge focused pair.

BCQNXX AM141034 Lawn Mower High Lift BladeCheck it on Amazon
3

GICOOL AM137327 High Lift Mower Blades: Best for 40MnB steel high lift cutting

GICOOL AM137327 High Lift Mower Blades, best lawn mower blades for john deere
9.5/10Our score
  • 2 pack high lift blades for 42 in deck
  • 21-1/2 in length, 2-2/3 in width
  • 40MnB steel
  • 7 point star center hole

A 2 pack of 21-1/2 in high lift blades in 40MnB steel for John Deere 42 in deck mowers.

See it on Amazon

Pros

  • 40MnB steel construction
  • High lift air lift 1-3/8 in
  • Fits many 42 in models

Cons

  • 42 in deck only
  • High lift style, not mulching style

This GICOOL 2 pack suits 42 in John Deere owners who want high lift cutting in 40MnB steel. Each blade measures 21-1/2 in long, 2-2/3 in wide and 1/5 in thick, with 1-3/8 in air lift and a 7 point star center hole.

The stated steel and lift explain its high score.

In daily use, the extra air lift helps with tall grass and side discharge. GICOOL says the cutting edge has a rust resistant coating that wears off during use, and that the blades are balance tested to help limit vibration.

The 21-1/2 in length is a touch longer than the 21-1/4 in BCQNXX blade, so compare length to your old blade as part of the fit check.

The trade off is style. This is a high lift blade, not a mulching blade.

Buyers who want finer clippings returned to the lawn should choose a Gator, mulching or 3-N-1 set instead of this discharge focused pair.

GICOOL AM137327 High Lift Mower BladesCheck it on Amazon
4

John Deere OEM High Lift Mower Blade: Best for OEM high lift on 48 in decks

John Deere OEM High Lift Mower Blade, best lawn mower blades for john deere
9.3/10Our score
  • OEM part numbers GY20852, AM141035, GX21784, GX21786
  • High lift style
  • Fits 145, 155C, LA130 to LA165, D140 to D160
  • Alloy steel

An OEM high lift blade kit for 48 in John Deere tractors including LA130 to LA165 and D140 to D160.

See it on Amazon

Pros

  • OEM high lift style
  • 48 in deck fit list
  • Carbon and boron steel per John Deere

Cons

  • 48 in deck only
  • Not a mulching profile

This OEM high lift kit suits 48 in John Deere owners who want a factory number match. It replaces GY20852, AM141035, GX21784 and GX21786, and fits the 145, 155C, LA130 to LA165 and D140 to D160 in the stated list.

John Deere says the blades use carbon and boron for hardness and a sharp edge.

In daily use, the high lift style helps move clippings for discharge or collection on a 48 in deck. Alloy steel construction and the OEM numbers make fit checks simpler than with a long aftermarket list.

The stated cutting width of 48 in and the 3 item count match the three blade layout of a 48 in deck, which helps you confirm the set count before you start.

The trade off is deck size and style. It fits 48 in decks only, and it is not a mulching profile.

If you mulch on a 48 in deck, the GICOOL mulching 3 pack below is the closer match for that use.

John Deere OEM High Lift Mower BladeCheck it on Amazon
5

JXJKCZ GY20850 GX22151 Gator Mulching Blades Fits: Best for Gator mulching on 42 in decks

JXJKCZ GY20850 GX22151 Gator Mulching Blades Fits, best lawn mower blades for john deere
9.1/10Our score
  • 2 pack Gator mulching blades
  • 21-3/8 in length, 2-3/4 in width
  • Replaces GY20850, GX22151, AM141033, AM137328, UC21583
  • 7 point star

A 2 pack of 21-3/8 in Gator mulching blades for 42 in John Deere decks from the 102 to X310 range.

See it on Amazon

Pros

  • Gator mulching profile
  • 2 pack for 42 in decks
  • Fits S120, S130, D110, D130 and more

Cons

  • Mulching profile, not high lift
  • Check star hole fit

This JXJKCZ 2 pack suits 42 in John Deere owners who want Gator mulching blades. Each blade measures 21-3/8 in long, 2-3/4 in wide and 0.164 in thick, with a precise 7 point star hole.

It replaces GY20850, GX22151, AM141033, AM137328 and UC21583.

In daily use, the Gator profile is made to cut clippings smaller as they pass under the deck. That suits mulching where you want clippings returned to the lawn rather than discharged to the side.

The fit list covers S120, S130, D110, D130, X105, X145, X300, LA120, LA125 and E110 models. The 24 month after sales warranty description in the listing is a stated service point to note when you compare support terms.

The trade off is discharge power. Mulching blades do not lift clippings like high lift blades.

In tall or wet grass, a high lift set may clear the deck better, while this set favors finer clippings and a cleaner return to the lawn.

JXJKCZ GY20850 GX22151 Gator Mulching Blades FitsCheck it on Amazon
6

KANXAJJY: Best for X300 and ZTrak 42 in decks

KANXAJJY, best lawn mower blades for john deere
8.8/10Our score
  • 2 pack blades for 42 in deck
  • 21-2/5 in length, 2-1/2 in width
  • Replaces M170642, UC22008
  • Fits X330, X350, X354, X370 and Z335 to Z345

A 2 pack of 21-2/5 in blades for John Deere X330 to X380 tractors and Z335 to Z345 zero turn mowers.

See it on Amazon

Pros

  • Fits X330 to X380 range
  • Fits Z335E to Z345R ZTrak
  • Thicker 0.197 in blade

Cons

  • Narrower 2-1/2 in width
  • Check center hole before order

This KANXAJJY 2 pack suits owners of John Deere X330, X350, X354, X370 and X380 tractors, plus Z335E, Z335M, Z345M and Z345R zero turn mowers. Each blade measures 21-2/5 in long, 2-1/2 in wide and 0.197 in thick, with a 51/64 in center hole for a 42 in deck.

In daily use, the thicker 0.197 in steel and powder coating support durability and rust resistance. The narrower 2-1/2 in width is a key detail, so compare it to your old blade before you order.

The center hole size also sets this set apart, because most other 42 in picks here use a 7 point star hole instead of a 51/64 in hole. Confirming that hole shape avoids a fit issue that length alone would not reveal.

The trade off is fit scope. This set is aimed at the X300 family and ZTrak models listed, not the wider LA and D list.

If your model is not named here, the OEM GY20850 kit or the BCQNXX high lift set is a safer starting point.

7

Apeixoto 2PCS 3-N-1 Blades Fit: Best for 3-N-1 use on 42 in decks

Apeixoto 2PCS 3-N-1 Blades Fit, best lawn mower blades for john deere
8.6/10Our score
  • 2 pack 3-N-1 blades
  • 21-3/8 in length, 2-3/4 in width
  • Replaces GY20850, GX22151, AM137328, AM137333, AM141033
  • Fine steel with black painting

A 2 pack of 21-3/8 in 3-N-1 blades for 42 in John Deere decks including 102, D100 and LA100 models.

See it on Amazon

Pros

  • 3-N-1 blade style
  • 2 pack for 42 in decks
  • Replaces five OEM numbers

Cons

  • 42 in deck only
  • Check fitment list before order

This Apeixoto 2 pack suits 42 in John Deere owners who want a 3-N-1 blade style. Each blade measures 21-3/8 in long and 2-3/4 in wide, in fine steel with black painting for rust and corrosion resistance.

It replaces GY20850, GX22151, AM137328, AM137333 and AM141033.

In daily use, a 3-N-1 style aims to cover mulching, bagging and discharge with one blade shape. That flexibility helps if you switch between modes through the season instead of keeping separate blade sets for each job.

The fit list covers 102, D100, LA100, S240 and X105 models in the stated list, so model checking still matters even with a broad replacement list.

The trade off is specialization. A blade that tries to do three jobs may not match a dedicated high lift blade for tall grass or a dedicated mulching blade for fine clippings.

Match your most common discharge need before you choose this set.

Apeixoto 2PCS 3-N-1 Blades FitCheck it on Amazon
8

Apeixoto 3PCS GX21784 Blades Fit: Best for 3-in-1 blades on 48 in decks

Apeixoto 3PCS GX21784 Blades Fit, best lawn mower blades for john deere
8.4/10Our score
  • 3 pack 3-in-1 blades
  • 17 in length, 2-5/8 in width
  • Replaces GY20852, GX21784, AM137757, AM141035
  • Fine steel with black painting

A 3 pack of 17 in 3-in-1 blades for 48 in John Deere decks including LA140, D140 and X165 models.

See it on Amazon

Pros

  • 3 pack for 48 in decks
  • 3-in-1 blade style
  • Fits LA and D 48 in models

Cons

  • 48 in deck only
  • Shorter 17 in blades need 3 per deck

This Apeixoto 3 pack suits 48 in John Deere owners who want 3-in-1 blades. Each blade measures 17 in long and 2-5/8 in wide, in fine steel with black painting.

It replaces GY20852, GX21784, AM137757 and AM141035 for 48 in decks.

In daily use, a 48 in deck needs 3 shorter blades, so the 3 pack count matches the deck layout. The fit list covers 145, 155C, D140 to D160, E140 to E170, LA130 to LA165, S140 to S170, X140, X165 to X167 and Z245 to Z355 models.

Black painting is stated as rust and corrosion resistance, which matters for blades stored between seasons.

The trade off is blade length per blade. At 17 in each, correct overlap and balance across 3 blades matter more than on a 2 blade deck.

If you want a dedicated mulching profile, compare the GICOOL 48 in mulching set below before you decide.

Apeixoto 3PCS GX21784 Blades FitCheck it on Amazon
9

GICOOL GY20852 Mower Mulching Blades for JD: Best for mulching, bagging and discharge on 48 in decks

GICOOL GY20852 Mower Mulching Blades for JD, best lawn mower blades for john deere
8.1/10Our score
  • 3 mulching blades for 48 in deck
  • 17 in length, 2-5/8 in width
  • 40MnB steel
  • 7 point star center hole

A 3 pack of 17 in mulching blades for John Deere 48 in decks, designed for mulching, bagging and side discharge.

See it on Amazon

Pros

  • Mulching, bagging and side discharge use
  • 40MnB steel construction
  • 3 blades included

Cons

  • 48 in deck only
  • Check 7 point star hole

This GICOOL 3 pack suits 48 in John Deere owners who want mulching blades. Each blade measures 17 in long, 2-5/8 in wide and 5/32 in thick, with 1-1/8 in air lift and a 7 point star center hole.

It is made from 40MnB steel and includes 3 blades.

In daily use, the curved profile helps break clippings into smaller pieces for mulching. The lifting wings also help move clippings for bagging or side discharge, so GICOOL describes 3-in-1 mowing versatility across those modes.

The stated cutting edge length of 5-1/8 in and the balance tested claim help explain how the blade is meant to cut and run smoothly across a 48 in deck with three blades.

The trade off is score and fit checks. Check your model, deck size and center hole shape before you order.

If you side discharge tall grass most often, an OEM high lift kit for 48 in decks may move clippings more strongly.

GICOOL GY20852 Mower Mulching Blades for JDCheck it on Amazon

What deck size do I have: 42 in or 48 in?

Measure the deck width first, because 42 in and 48 in blades are not interchangeable. A 42 in deck takes 2 blades near 21 in long.

A 48 in deck takes 3 blades near 17 in long.

Write down your mower model number before you shop. The model number, such as D110, LA120 or X300, lets you match the fit list instead of guessing by deck size alone.

Remove one old blade and note its length, width and center hole shape. Most picks here use a 7 point star hole, but the KANXAJJY set uses a 51/64 in hole.

42 in decks

42 in John Deere decks use 2 blades. The OEM GY20850 kit, BCQNXX high lift set, GICOOL high lift set, JXJKCZ Gator set and Apeixoto 3-N-1 set all target this size.

48 in decks

48 in John Deere decks use 3 blades. The OEM high lift kit, Apeixoto 3 pack and GICOOL mulching 3 pack target this size, with 17 in blades.

How to measure blade length and deck width

Measure deck width across the housing at its widest point, not by the strip of grass the mower leaves. That housing measurement is the size named as 42 in or 48 in in the fit lists.

Measure blade length from tip to tip along the longest edge. For 42 in decks you should see a blade near 21 in.

For 48 in decks you should see a blade near 17 in. A large gap from those ranges is a sign to recheck the model list.

Record width and center hole at the same time. Widths here range from 2-1/2 in to 2-3/4 in on 42 in blades.

Hole shape can matter more than a small width difference, so note star or round before you compare packs.

Which John Deere blade style fits how you mow?

Pick the blade style by your discharge habit, not by the lowest score gap. High lift, mulching, Gator and 3-N-1 blades move clippings in different ways.

High lift blades have taller wings and more air lift. They suit side discharge and bagging, especially in tall grass.

The BCQNXX and GICOOL high lift sets are built for that job.

High lift blades

High lift blades lift clippings out of the deck. That helps when grass is tall, thick or damp and clippings need to exit fast.

The trade off is coarser clippings left on the lawn.

Mulching and Gator blades

Mulching and Gator blades cut clippings more as they stay under the deck. That suits returning clippings to the lawn in shorter grass.

Our guide to best lawn mower blades for mulching covers this style in more depth.

3-N-1 and 3-in-1 blades

3-N-1 blades aim for mulching, bagging and discharge in one shape. That flexibility helps if you change modes often.

A dedicated blade may still do one job better than a combined shape.

How do I check OEM numbers and center holes?

Find the OEM number stamped on your old blade or in your manual. GY20850 is common on 42 in decks.

GY20852 and GX21784 are common on 48 in decks.

Match that number to the replacement list for each pick. AM141034, AM137327 and M154062 are replacement numbers for several 42 in high lift sets.

UC22008 and M170642 point to the X330 to X380 and ZTrak set.

Then check the center hole. A 7 point star hole needs a matching star shaft.

A round hole needs a different blade. Measure the hole before you order, not after the old blade is off.

If a service code shows on the mower, our guide to What Does Svc Mean On John Deere Lawn Mower? may explain the message. If you are unsure of the mower age, How Old Is My John Deere Lawn Mower? helps you find the year from the model numbers.

How do I install and care for new mower blades?

Disconnect the spark plug wire before you lift the deck or touch a blade. Wear gloves, since a sharp edge can cut during removal and installation.

Lift the deck to its highest position and remove the flange nut that holds the old blade. Keep the hardware in order, then fit the new blade with the cutting edge facing the right way for your deck.

Tighten the nut to the maker spec for your model and test the blade for free spin by hand with the engine off. A bent blade, damaged washer or wrong hole shape can cause vibration.

After installation, clean grass from the deck underside and check edge condition each season. Sharpen or replace a dull or nicked edge, and store spare blades dry to limit rust.

What are the trade offs between OEM and aftermarket blades?

OEM blades match a factory number and a known fit list. The John Deere GY20850 and GY20852 kits score high here because fit checks are simpler for many owners.

Aftermarket blades can match the same OEM numbers at a different spec point. The BCQNXX set replaces five OEM numbers, and the GICOOL sets use 40MnB steel with stated air lift and thickness.

Neither choice wins on brand alone. Match length, width, thickness and hole shape to your old blade, then match blade style to discharge or mulching use.

If you own a different brand, our best ryobi lawn mower blades guide covers that fit list instead. For John Deere, stay with the OEM number and deck size checks above.

Verdict: which John Deere mower blades should you buy?

Pick the John Deere Original Equipment Mower Blade Kit GY20850 if you have a 42 in deck and want the simplest OEM match. Pick the BCQNXX or GICOOL high lift 2 pack if you side discharge tall grass on a 42 in deck.

Pick the JXJKCZ Gator set if you mulch on a 42 in deck.

Pick the John Deere OEM high lift kit if you have a 48 in deck and side discharge. Pick the GICOOL GY20852 mulching 3 pack if you mulch, bag or side discharge on a 48 in deck.

Pick the KANXAJJY set only if your model is X330 to X380 or Z335 to Z345.

Measure your deck, write down the OEM number and check the center hole before you order. That order of checks will place these best lawn mower blades for John Deere in the right deck and save a return trip.

Our top 3 picks at a glance

  1. 1 John Deere Original Equipment Mower Blade Kit
    Best for OEM fit on 42 in decks

    John Deere Original Equipment Mower Blade Kit

    9.7/10 our score

    See it on Amazon
  2. 2 BCQNXX AM141034 Lawn Mower High Lift Blade
    Best for high lift discharge on 42 in decks

    BCQNXX AM141034 Lawn Mower High Lift Blade

    9.6/10 our score

    See it on Amazon
  3. 3 GICOOL AM137327 High Lift Mower Blades
    Best for 40MnB steel high lift cutting

    GICOOL AM137327 High Lift Mower Blades

    9.5/10 our score

    See it on Amazon

Frequently asked questions

How do I match a blade to my John Deere deck size?

Measure your deck first. Most picks here split into 42 in decks with 2 blades and 48 in decks with 3 blades.

Then match the OEM part number on your old blade, such as GY20850 for many 42 in models or GY20852 for many 48 in models.

Check length, width and center hole shape before you order.

High lift or mulching blades for John Deere?

High lift blades lift clippings for side discharge or bagging, which helps in tall or wet grass. Mulching and Gator blades cut clippings smaller for return to the lawn.

Our score weighs specs, features and buyer feedback against what you're shopping for, so match the blade style to how you mow most often.

How often should I replace John Deere mower blades?

Check the edge often and replace when the edge is bent, cracked or worn past a safe shape. Dull blades tear grass and leave a rough cut.

Keep a spare set on hand if you mow weekly, so you can swap blades and sharpen or replace the old set without losing a mowing day.

Can I use aftermarket blades on a John Deere mower?

Yes, if the length, center hole and OEM replacement numbers match your deck. Many picks here replace John Deere numbers such as AM141034 and GX21784.

Measure the old blade and compare the hole shape, since a 7 point star hole will not fit a different center hole shape.