7 Best High Wheel Mowers (November 2026)
The best high wheel mowers include the AR-PRO 15x6.00-6 Lawn Mower Tire and Wheel for riding mower front wheels, the CheeMuii 2PCS 8" Lawn Mower Wheels Kit for push mower refresh, and the XaXmTee 4PCS M111489 Lawn Mower Deck Wheels for anti-scalp deck wheels.
On this page (9 sections)
- The best high wheel mowers and wheel upgrades for uneven lawns
- How to compare high wheel designs side by side
- What size wheel makes a mower easier to push?
- Should you buy a new high wheel mower or just new wheels?
- How do you measure a mower wheel before you order?
- How do you install replacement mower wheels?
- What care keeps high wheels rolling for years?
- Which wheel option fits your yard and mower?
- Verdict: which high wheel mower should you buy?
The best high wheel mower for most uneven lawns is the YARDMAX 22 in. 201cc Select PACE, because its high rear wheels and CVT pace control make bumps and slopes easier to cross.
If your current mower cuts well but rolls poorly, a wheel kit can be the cheaper fix.
High wheels help in a simple way. A larger rear wheel rolls over a bump with less push than a small wheel, and it keeps more weight on traction.
That matters on ruts, roots, dips and damp grass where a small wheel snags.
This guide mixes one complete mower with wheels and a wheeled trimmer. That mix is honest, because many shoppers searching for high wheel mowers actually need a repair part first.
Our score weighs specs, features and buyer feedback against what you are shopping for.
Start with How To Choose The Right Lawn Mower? if you are unsure whether to repair or replace. Then check wheel size, bore and hub before you order any part.
Our picks at a glance
-
1
Best for riding mower front wheelsAR-PRO 15x6.00-6 Lawn Mower Tire and Wheel
9.7/10 our score
See it on Amazon -
2
Best for push mower refreshCheeMuii 2PCS 8" Lawn Mower Wheels Kit
9.6/10 our score
See it on Amazon -
3
Best for anti-scalp deck wheelsXaXmTee 4PCS M111489 Lawn Mower Deck Wheels
9.5/10 our score
See it on Amazon
- 4
Check itYARDMAX 22 in. 201cc Select PACE
Best for uneven walk-behind lawns - 5
Check itBILT HARD Walk Behind String Trimmer
Best for tall grass and brush - 6
Check itAntanker 10 Inch Lawn Mower Wheels Replacement
Best for 10 inch universal swaps - 7
Check itSutmorly 7 inch Front Wheel Assembly
Best for specific front wheel fits
The best high wheel mowers and wheel upgrades for uneven lawns
The YARDMAX is the only complete high wheel walk-behind mower here. The rest are wheels for riding mowers, push mowers and decks, plus a walk-behind trimmer for tall growth.
Choose by the machine you already own before you compare scores.
AR-PRO 15x6.00-6 Lawn Mower Tire and Wheel: Best for riding mower front wheels
- 15x6.00-6 tubeless tire and wheel, 2 pack
- 3 inch centered hub with 3/4 inch bushings
- 4-ply construction, up to 500 lb per tire
- Wide turf tread
A complete front tire and wheel set for compatible riding mowers, built to steer more smoothly than worn front tires.
Pros
- Ready to install as complete assemblies
- Wide turf tread for traction
- Includes washers for axle spacing
Cons
- Riding mower use only
- Requires a 15x6.00-6 fit with 3 inch centered hub
This AR-PRO pair suits owners of compatible John Deere 100, D100, E100, L100, LA100, LT and STX riding mowers, plus many Craftsman, Cub Cadet and Husqvarna tractors. It is a front wheel answer, not a walk-behind mower answer.
Each assembly is a 15x6.00-6 tubeless tire on a rim, with a 3 inch centered hub and 3/4 inch sintered iron bushings. Six metal washers are included to help with axle spacing.
That centered hub helps the front end track straight and steer with less wobble, and the washers let you fine tune spacing without buying separate parts.
The 4-ply tuless build supports up to 500 lb per tire at the recommended pressure. The wide turf tread aims for traction with less lawn damage.
On a riding mower, fresh front tires often improve steering feel more than they change cutting height, especially on damp grass or gravel where worn tread slips.
The trade-off is fit. You need a 15x6.00-6 front tire with a 3 inch centered hub.
Measure the old tire and check the hub before ordering. This set does nothing for a push mower, and it will not raise rear drive height.
CheeMuii 2PCS 8" Lawn Mower Wheels Kit: Best for push mower refresh
- 8 in wheels, 2 pack
- 1-3/4 in width, 1/2 in bore
- Includes bolts and lock nuts
- Mixed tread pattern
A simple 8 inch wheel kit for standard push mowers and yard equipment that need a quick wheel swap.
Pros
- Includes bolts and lock nuts
- Mixed tread for grip
- Fits many common yard tools
Cons
- 8 inch size is not high wheel height
- Plastic wheels, not rubber tires
The CheeMuii kit suits a standard push mower whose rear wheels are worn, cracked or hard to push. It also fits garden carts, hand trucks, generators, tillers and wheelbarrows, which makes it a useful yard spare for owners of several machines.
Each wheel is 8 inches in diameter and 1-3/4 inches wide, with a 1/2 inch bore. The pack includes 2 wheels, 2 bolts and 2 lock nuts.
Installation is a slip-on swap after you remove the old hex nut, so most owners can finish the job with basic hand tools and no shop help.
The wheels use high-strength PVC plastic with a mixed tread pattern. CheeMuii says the material resists wear, aging and high temperature.
The tread is meant to add friction and reduce slipping on grass, and the shape helps the wheel keep grip when the lawn is wet or dusty.
The trade-off is height. At 8 inches, this is a standard replacement, not a high wheel upgrade.
If your mower already has 8 inch rear wheels, this restores function for less money. If you want taller wheels, look at the 10 inch option below.
XaXmTee 4PCS M111489 Lawn Mower Deck Wheels: Best for anti-scalp deck wheels
- 5 in deck gauge wheels, 4 pack
- 5/8 in bore, 2 in height
- Polypropylene wheels
- Smooth tread
Four small deck wheels that help keep a riding mower deck at its set height and reduce scalping.
Pros
- Four wheels in one pack
- Fits listed John Deere and MTD decks
- Polypropylene resists wear
Cons
- Deck wheels, not drive wheels
- Small 5 inch size
These XaXmTee wheels suit riding mower owners whose deck scalps on bumps or whose old gauge wheels are worn flat. They are deck wheels, so they do not make any mower easier to push, and they should not be confused with rear drive wheels.
The pack has 4 wheels at 5 inches in diameter, with a 5/8 inch bore and 2 inch height. The hub is 1-1/2 inches and the tread is smooth.
They are made of polypropylene, which the maker says resists friction, aging and heat, and the 0.92 inch thick section is intended to wear more slowly than thin wheels.
Fit matters here. The wheels replace John Deere M111489, AM116299, AM125172 and AM133602, plus MTD 734-04039 and related numbers.
They fit listed John Deere 38, 40 and 50 inch decks and MTD 46 inch decks, covering many 200 and 300 series tractors in the listed groups.
The trade-off is purpose. Small deck wheels help protect the deck height setting on uneven ground.
They will not fix a worn drive wheel, a flat tire or a mower that is hard to maneuver on a hill. Measure bore and deck fit first.
YARDMAX 22 in. 201cc Select PACE: Best for uneven walk-behind lawns
- 22 in 201cc gas engine
- 6-speed CVT front wheel drive
- High rear wheels with spiked tread
- 3-in-1, 7 cutting heights
The only complete high wheel mower in this group, with a CVT that lets you match pace to your walking speed.
Pros
- High rear wheels for uneven ground
- CVT pace control
- Single-lever height adjustment
Cons
- 95.7 lb, heavier to lift into storage
- Gas engine needs regular fuel care
The YARDMAX YG2860 suits buyers who want a complete high wheel mower for uneven, sloped or bumpy yards. It is the central pick in this guide because it pairs high rear wheels with self-propelled drive, rather than asking you to push the full weight.
It has a 22 inch deck and a 201cc OHV engine with automatic choke, so you do not prime or choke to start. The front wheel drive uses a 6-speed CVT, which lets the pace follow your walking speed through a lever.
That helps on slopes where a fixed gear can feel too fast or too slow, and it helps you slow down before a rough patch.
High rear wheels have double ball bearings and rubber tires with an aggressive spiked tread. YARDMAX says the tread increases traction and maneuverability.
Seven cutting heights run from 1.38 to 3.55 inches, set with one lever, and the MaxFlow volute deck is aimed at mulching or rear bagging depending on your preference.
The trade-off is weight and upkeep. At 95.7 lb, it is not light to lift or store, though the handle folds for compact storage.
It is also a gas mower, so fuel and oil care are part of ownership, along with checking the deck washout port after mowing.
BILT HARD Walk Behind String Trimmer: Best for tall grass and brush
- 170cc 4-cycle gas engine
- 22 in cutting diameter
- 14 in flat free wheels
- One-piece steel deck
A wheeled trimmer for tall grass and light brush where a regular mower deck would bog down.
Pros
- 14 inch wheels roll over rough ground
- 22 inch cutting path
- Foldable handle for storage
Cons
- Not a finished lawn mower
- Manual recoil start
The BILT HARD suits yards with tall grass, weeds and light brush along fences, ditches and rough edges. It is a walk-behind string trimmer, not a mower for a finished lawn, and it works best where a rotary deck would clog or bounce.
It runs a 170cc 4-cycle OHV engine with manual recoil start and clears a 22 inch path. Heavy-duty nylon line cuts through thick grass and weeds.
A one-piece steel deck adds strength and limits vibration, according to BILT HARD, which matters when the line head hits dense growth repeatedly.
The key feature for this guide is the 14 inch flat free wheels. Large wheels help this trimmer roll over uneven ground and into spots a standard mower cannot reach.
The handle folds for storage, and the unit weighs 54.1 lb, so it sits between a push mower and heavier brush machines in handling.
The trade-off is finish. A string trimmer leaves a rougher cut than a mower deck and does not mulch or bag like a mower.
Use it for clearing, then mow the area with a deck mower for the final finish, and keep line length in mind because longer line checks balance and effort.
Antanker 10 Inch Lawn Mower Wheels Replacement: Best for 10 inch universal swaps
- 10 in wheels, 2 pack
- 1.5 in width, 1/2 in bore
- Includes bolts, locking nuts and washers
- Mixed tread pattern
A 10 inch universal replacement pair that steps up from 10 inch wheels for a little more roll height.
Pros
- Taller than 8 inch wheels
- Complete hardware included
- Mixed tread for grass and pavement
Cons
- 10 inch is still below true high wheel height
- Check bore and width before ordering
The Antanker pair suits push mower owners who want a modest step up in wheel size without changing machines. At 10 inches, it sits between the 8 inch CheeMuii kit and a true high wheel mower, which makes it a practical middle option.
Each wheel is 10 inches in diameter and 1.5 inches wide, with a 1/2 inch bore for a wobble-free fit on standard axles. The kit includes 2 wheels, 2 bolts, 2 locking nuts and washers.
Antanker says it fits standard push mowers, including Troy-Bilt, MTD, Murray, Craftsman and Toro patterns, plus carts and pressure washers in that universal group.
The wheels use high-impact PP plastic with a mixed tread. Antanker says the tread adds friction on grass, gravel and pavement.
The extra diameter can make a mower roll over small bumps with a little less effort than 8 inch wheels, and the narrower width can help it fit where a wider wheel might rub the deck.
The trade-off is still height. Ten inches helps, but it is not the same as high rear wheels on a self-propelled mower.
Measure your axle and old wheel first, because bore and width must match, and check clearance before you tighten the hardware.
Sutmorly 7 inch Front Wheel Assembly: Best for specific front wheel fits
- 7 in front wheels, 2 pack
- 2 in width, 1/2 in bore
- 1.25 in copper steel bushing
- Replaces MTD 634-05272
A model-specific 7 inch front wheel pair for listed Troy-Bilt, Bolens, Huskee, MTD and Yard Machines mowers.
Pros
- Model-specific fit for listed mowers
- Copper steel bushing
- Two wheels per pack
Cons
- Small front wheel, not a high wheel upgrade
- Fit is limited to listed part numbers
The Sutmorly pair suits owners of listed walk-behind mowers who need front wheels that match an exact part number. It is a repair part, not an upgrade to high wheels, and its value comes from correct fit rather than size.
The wheels are 7 inches in diameter and 2 inches wide, with a 1/2 inch bore. They replace MTD 634-05272 and fit Troy-Bilt, Bolens, Huskee, MTD, Yard Machines and Yard-Man mowers with a 7 x 2 inch front wheel.
The pack has 2 wheels, so you can refresh both sides at once and keep steering even.
A 1.25 inch oil impregnated copper steel bushing helps the wheel spin with less friction. The wheels are made of high impact polypropylene for durability.
That bushing is a practical detail, because front wheels need to pivot and roll freely for steering, and a dry or worn bushing can make turns feel heavy.
The trade-off is size and fit. A 7 inch front wheel will not turn a mower into a high wheel mower.
Check the original part number before ordering, and measure diameter, width and bore against the old wheel, because the listed fit is narrower than the universal kits here.
How to compare high wheel designs side by side
| Product | Best for | Size | Hub | Count | Our score |
|---|---|---|---|---|---|
| AR-PRO 15x6.00-6 Lawn Mower Tire and Wheel | riding mower front wheels | 15 x 6.00-6 in | 3 in centered, 3/4 in bushings | 2 | 9.7 |
| CheeMuii 2PCS 8" Lawn Mower Wheels Kit | push mower refresh | 9.6 | |||
| XaXmTee 4PCS M111489 Lawn Mower Deck Wheels | anti-scalp deck wheels | 4 | 9.5 | ||
| YARDMAX 22 in. 201cc Select PACE | uneven walk-behind lawns | 9.4 | |||
| BILT HARD Walk Behind String Trimmer | tall grass and brush | 9.3 | |||
| Antanker 10 Inch Lawn Mower Wheels Replacement | 10 inch universal swaps | 8.7 | |||
| Sutmorly 7 inch Front Wheel Assembly | specific front wheel fits | 8.4 |
We compared wheel diameter, width, bore, hub type, included hardware and stated fit. We also separated complete machines from repair parts, because a wheel score should not be read as a mower score.
The YARDMAX leads as a complete mower because it is the only option with a deck, engine and high rear wheels in one unit. The BILT HARD leads for tall growth because its 14 inch wheels and 22 inch trimmer path solve a different job.
The wheel kits win on value when the deck and engine still work.
AR-PRO is a riding mower front tire set at 15 inches. CheeMuii, Antanker and Sutmorly are push mower wheels at 8, 10 and 7 inches.
XaXmTee is a 5 inch deck wheel set. Those jobs overlap in search results, but they do not overlap in use.
Why diameter alone does not tell the whole story
Diameter changes how a wheel meets a bump, but width, tread and bearing type change the rest of the ride. A wide turf tire spreads load and protects grass, while a narrow plastic wheel may grip less on wet soil even at the same diameter.
A bushing that is dry or worn can also erase the benefit of a larger wheel.
Hub design matters for steering and tracking. A centered hub keeps the tire aligned with the axle, while an offset hub can change clearance and ride height at the deck.
That is why the AR-PRO centered hub and the Sutmorly copper steel bushing deserve attention beyond the headline size.
What size wheel makes a mower easier to push?
Larger wheels roll over bumps with less effort, and wider wheels spread weight over more ground. A 10 inch wheel will cross a root or rut more easily than a 7 or 8 inch wheel on the same mower.
Height is not the only factor. Tire tread, axle friction and mower weight also change push effort.
A worn wheel with a dry bushing can drag even if its diameter is correct.
For a true high wheel mower, look for tall rear wheels paired with a smaller front wheel. That layout raises the rear axle and lets the mower pivot over uneven ground.
The YARDMAX uses that layout for walk-behind use.
Should you buy a new high wheel mower or just new wheels?
Buy new wheels first if the engine starts, the deck cuts evenly and the only problem is rolling. A wheel swap costs less than a mower and takes a few simple tools.
Buy a complete mower if the deck is rusted, the engine is unreliable or the frame is bent. New wheels cannot fix a poor cut or a weak engine.
If tall grass is the main problem, consider a wheeled trimmer before a new mower. The BILT HARD clears 22 inches of tall growth where a mower deck would stall.
When you are deciding, read What Is the Best Mower for Hills? for slope and traction advice. Hills change both wheel choice and drive choice.
How do you measure a mower wheel before you order?
Measure diameter across the tire, width across the tread and bore across the axle hole. Write all three numbers down before you shop.
Bore and hub
Bore must match the axle. A wheel with a 1/2 inch bore will not fit a 5/8 inch axle without a bushing or spacer.
Riding mower front tires also need the right hub width and bushing size.
Width and tread
Width affects stability and ground pressure. Wider wheels grip better but can rub the deck or frame.
Turf tread helps on lawns, while spiked or aggressive tread helps on damp or loose ground.
Included hardware
Check what is in the pack. Some kits include bolts, lock nuts and washers.
Others are wheels only. Missing hardware can turn a quick swap into a second trip.
How do you install replacement mower wheels?
Start with the engine off and the spark plug wire removed on gas mowers. Tip the mower only if you need to, and keep the carburetor side up on many walk-behind models.
Remove the old wheel nut or cap, then slide the old wheel off the axle. Clean rust and grass from the axle with a wire brush.
A clean axle helps the new wheel sit straight and reduces early wear on the bore.
Slide the new wheel on, add washers if the kit includes them, and tighten the nut snugly. Do not overtighten plastic wheel hardware, because you can crack the hub or strip threads.
Spin the wheel by hand. It should turn freely with no wobble.
If it wobbles, check the bore, washers and axle seating before you mow.
What care keeps high wheels rolling for years?
Keep axles clean and free of grass and mud. Packed debris adds drag and can wear bushings faster.
Check tire pressure on pneumatic tires before each season. Low pressure makes a wheel feel smaller and harder to push.
Solid or plastic wheels do not need air, but they still need axle checks and hardware checks.
Tighten wheel hardware after the first few mows. Bolts and nuts can settle as the wheel seats.
Recheck them with the same care you use for deck bolts.
For help with mowing technique, see How To Use Lawn Mower 2.0? and How To Cut High Grass With Lawn Mower?. Good technique keeps wheel effort down on rough ground.
Which wheel option fits your yard and mower?
Pick the AR-PRO set for a compatible riding mower with worn 15 inch front tires. Pick CheeMuii for a standard 8 inch push mower refresh.
Pick Antanker for a 10 inch universal swap.
Pick XaXmTee for worn deck gauge wheels on listed John Deere or MTD decks. Pick Sutmorly when your mower needs the exact MTD 634-05272 front wheel fit.
Pick the YARDMAX when you want a complete high wheel mower. Pick the BILT HARD for tall grass and brush.
For a broader buying framework, use How To Choose A Good Lawn Mower? and How To Choose Lawn Mower?. Those guides help you weigh deck size, drive type and engine needs before you spend.
Verdict: which high wheel mower should you buy?
The best high wheel mower for most uneven lawns is the YARDMAX 22 in. 201cc Select PACE, because it is a complete mower with high rear wheels, spiked tread and CVT pace control.
It suits sloped and bumpy yards where pushing a standard mower is tiring.
If your current mower still cuts well, buy wheels instead. Choose Antanker 10 inch wheels for a small height step up, CheeMuii 8 inch wheels for a direct standard replacement, and AR-PRO 15 inch assemblies for a compatible riding mower.
Choose the BILT HARD when tall grass and brush are the job, not a finished lawn. Choose XaXmTee deck wheels when scalping is the problem, and Sutmorly front wheels when the part number must match exactly.
Measure diameter, width and bore before you order. That one step prevents most fit problems and helps you pick the right high wheel mower or wheel kit for your yard.
Our top 3 picks at a glance
-
1
Best for riding mower front wheelsAR-PRO 15x6.00-6 Lawn Mower Tire and Wheel
9.7/10 our score
See it on Amazon -
2
Best for push mower refreshCheeMuii 2PCS 8" Lawn Mower Wheels Kit
9.6/10 our score
See it on Amazon -
3
Best for anti-scalp deck wheelsXaXmTee 4PCS M111489 Lawn Mower Deck Wheels
9.5/10 our score
See it on Amazon
About this guide: Our look at high wheel mowers draws on maker specs, materials and what owners report. See how we research.



