9 Best Lawn Mower Ramps for Sheds (October 2026)
The best lawn mower ramps for shed include the MaxxHaul 50946 Aluminum Ramp Top Kit for custom board ramps, the VNN Shed Ramps for Lawn Mower for a wide shed entrance, and the VEVOR Trailer Ramps for a low threshold.
On this page (6 sections)
The best lawn mower ramps for sheds match the threshold rise, doorway width and mower tire spacing. For most buyers, a pair of ramps with a traction surface and a capacity above the mower’s weight is a practical starting point; a longer ramp can reduce the steepness of the approach.
This roundup includes fixed width sets, longer aluminum tracks and a ramp top kit that uses separate boards. For a related question about mower transport, see whether a lawn mower is a vehicle.
We compared the stated sizes, capacities, materials and traction details to help you narrow the choices.
Check your mower’s weight in its manual, then measure the shed before choosing.
Our picks at a glance
-
1
-
2
-
3
- 4
Best for portable steel rampsCheck it - 5
Check itKOLOTOOL 55 in L Aluminum Shed Ramps
Best for a taller shed rise - 6
Check itgardhom 2PCS 39 x 11 in Aluminum Shed Ramps
Best for a wider individual track - 7
Check itKOLOTOOL 39 in L Aluminum Shed Ramps
Best for a moderate shed rise - 8
Best for a long narrow approachCheck it - 9
Check itKOLOTOOL Aluminum Shed Ramps for Lawn Mower
Best for a broad entrance platform
Which lawn mower ramps for shed entry fit these picks?
The MaxxHaul kit is the top pick for a custom board approach, while VNN’s broad set suits buyers who want a wide two-piece layout. The best match depends on the rise and the mower’s path into the shed.
Our score weighs stated specs and features against what you need for shed entry. A high capacity alone does not make a ramp the right fit if it is too short, too narrow or outside its recommended rise range.
| Product | Best for | Design | Width | Capacity | Our score |
|---|---|---|---|---|---|
| MaxxHaul 50946 Aluminum Ramp Top Kit | custom board ramps | Ramp top kit for 2 x 8 in boards | 8 in | 700 lb stated in description | 9.7 |
| VNN Shed Ramps for Lawn Mower | a wide shed entrance | 1500 lb | 9.6 | ||
| VEVOR Trailer Ramps | a low threshold | 1200 lb combined | 9.4 | ||
| Stalwart Loading Ramps | portable steel ramps | 1200 lb combined | 9.3 | ||
| KOLOTOOL 55 in L Aluminum Shed Ramps | a taller shed rise | 3000 lb pair | 9.1 | ||
| gardhom 2PCS 39 x 11 in Aluminum Shed Ramps | a wider individual track | 3000 lb pair | 9.0 | ||
| KOLOTOOL 39 in L Aluminum Shed Ramps | a moderate shed rise | 3000 lb | 8.7 | ||
| VNN Aluminum Shed Ramp 2PC | a long narrow approach | 1000 lb | 8.5 | ||
| KOLOTOOL Aluminum Shed Ramps for Lawn Mower | a broad entrance platform | 1500 lb pair | 8.1 |
MaxxHaul 50946 Aluminum Ramp Top Kit: Best for custom board ramps
- Fits 2 x 8 in boards
- Non-skid surface
- Protective pads
- Aluminum construction
This kit turns two 2 x 8 in boards into ramps, so you can choose board length to suit your shed rise. The non-skid surface and protective pads are useful details to consider when building a custom setup.
Pros
- Board length can be chosen for the entry
- Non-skid surface
- Protective pads
Cons
- Requires separate boards
- Check board length and placement for your threshold
The MaxxHaul kit is different from a ready-made pair: it attaches to 2 x 8 in boards that you supply. That lets you choose board length for your shed rise and available ground space, then make two tracks that align with the mower’s tires.
The kit has an 8 in width and a non-skid surface. Protective pads are included to help protect a tailgate, though a shed setup should still be checked for a secure fit at the threshold.
MaxxHaul’s description gives a maximum capacity of 700 lb, while a separate spec field reports 1400 lb. Because those figures conflict, confirm the applicable rating with the manufacturer before using it for a mower.
Choose this option if you’re comfortable selecting and preparing boards. If you prefer a ready-made pair, compare the ramp sizes below instead.
VNN Shed Ramps for Lawn Mower: Best for a wide shed entrance
- 29 in long per ramp
- 48 in combined width
- Punch plate surface
- 1500 lb capacity
The two-piece set has a 48 in combined width and punched surface for grip and drainage. Its stated capacity is 1500 lb, making it a candidate for a wide entrance when its length suits the threshold.
Pros
- Wide two-piece layout
- Punch plate surface
- Handles for moving or repositioning
Cons
- Measure the door opening and rise first
- Shorter length may not suit every threshold
VNN’s shed ramp is a two-piece set, with each piece measuring 29 x 24 in. Together, the ramps span 48 in, which makes this a candidate for a wide doorway or for a mower whose tires need more room than narrow tracks provide.
The punched surface is designed for grip and water drainage. VNN states a 1500 lb capacity and describes a 12.7-degree tilt angle, but the right approach still depends on your actual threshold rise and the ramp’s placement.
Pre-drilled holes and three screws are used for installation, and each ramp has a handle for moving or repositioning it. Check the full dimensions against the shed opening before setting it up.
This is the leading choice here for a wide shed entry. If your space is narrow, a pair of separate tracks may be easier to position.
VEVOR Trailer Ramps: Best for a low threshold
- Pair of 38.8 in ramps
- 9 in width each
- Perforated steel
- 1200 lb combined capacity
This pair has perforated steel surfaces and a recommended height range of 3.9–11.8 in. Its claw plates and beveled ends are designed to help the ramps sit at the step and create a smoother entry.
Pros
- Longer than many short shed ramps
- Perforations support traction and drainage
- Carrying handle
Cons
- Each ramp is 8.9 in wide
- Recommended rise range still needs to match your shed
VEVOR’s steel ramps measure 38.8 x 8.9 in each and have a combined capacity of 1200 lb. The maker recommends a rise of 3.9–11.8 in, giving you a defined range to compare with your shed threshold.
Perforations increase traction and allow water to drain. The pair also has claw plates designed to sit at the step, a beveled end for entry and a carrying handle for moving the ramps.
These are narrow individual tracks, so measure how far apart your mower’s tires sit and check that each tire has room to stay centered. VEVOR describes them for lawn mowers and other equipment, but the specific mower still needs to stay within the capacity.
Choose these when your rise fits the stated range and you want steel tracks with a longer approach than many compact ramps.
Stalwart Loading Ramps: Best for portable steel ramps
- Pair of 35.5 in ramps
- 8.5 in wide each
- Skid-resistant tread
- 1200 lb combined capacity
The steel pair has skid-resistant tread, angled foot plates and handles. Each ramp is rated for 600 lb, or 1200 lb together, so check both total capacity and how the mower’s tires will sit on the tracks.
Pros
- Handles for portability
- Angled foot plates
- Can be bolted together for a wider track
Cons
- Bolts for joining are not included
- Narrow tracks need careful tire alignment
Stalwart’s pair is 35.5 in long and 8.5 in wide per ramp, with a stated 600 lb rating for each and 1200 lb combined. The skid-resistant tread and angled foot plates are designed to support a smooth transition at the ends.
Each ramp weighs 9 lb and has an integrated handle. The two ramps can be bolted together to make a 17 in wide angled track, though bolts for joining them are not included.
For a mower, consider how the tires line up on the separate tracks and whether you need the joined layout. The combined capacity only applies when the mower’s load is distributed as intended across both ramps.
This is a portable steel option for buyers who want to move the ramps between a shed and other tasks. Confirm the doorway width and the rise before settling on it.
KOLOTOOL 55 in L Aluminum Shed Ramps: Best for a taller shed rise
- 55 in length
- 3000 lb pair capacity
- Aluminum
- Anti-skid holes
The 55 in aluminum pair is designed for a 6–18 in rise and has anti-skid holes. Its extra length can suit a taller shed threshold where a shorter ramp would create too steep an approach.
Pros
- Longer ramp length
- Stated 3000 lb pair capacity
- Traction holes drain water
Cons
- Confirm the actual rise is within its range
- Designed for shed and utility use rather than high truck beds
The 55 in KOLOTOOL ramps are intended for rises of 6–18 in, giving them the longest listed length in this group. A longer approach can be helpful for a taller shed threshold, provided you have enough ground space in front of the door.
The aluminum pair has a stated 3000 lb capacity and anti-skid traction holes designed to drain water. KOLOTOOL describes the ramps for shed and utility use, including riding mowers and snow blowers.
At 55 in, these ramps take more room to lay out than shorter models. Measure from the shed lip to the point where the ramp can rest on the ground, then compare that distance with the space available for the mower to approach.
Choose this pair if your rise is in range and you want a long aluminum ramp. It is not intended for loading a vehicle into a high pickup bed.
gardhom 2PCS 39 x 11 in Aluminum Shed Ramps: Best for a wider individual track
- 39 x 11 in each
- 3000 lb pair capacity
- Aluminum
- Anti-slip holes
Each aluminum ramp is 11 in wide, with a stated pair capacity of 3000 lb and a maximum applicable height of 12 in. That width may help with tire placement, provided the doorway and mower track spacing fit.
Pros
- 11 in individual ramp width
- Anti-slip holes
- Angled footrests
Cons
- Maximum stated height is 12 in
- Measure tire spacing and door opening
Each gardhom ramp is 39 x 11 in, giving the pair a wider track than many separate ramp sets. The aluminum ramps have anti-slip holes and angled footrests, with a stated capacity of 3000 lb per pair.
The stated maximum applicable height is 12 in. Check your rise against that limit and make sure the 11 in width gives each tire enough room without making the pair too wide for the doorway.
This set is described for sheds, steps and decks, as well as lawn mowers and snow blowers. Its wider individual tracks may suit buyers who want more room for alignment than an 8.5 or 8.9 in ramp offers.
Choose it when you need 11 in wide tracks and your threshold is no higher than the stated limit. A width measurement across the door helps confirm the pair will fit.
KOLOTOOL 39 in L Aluminum Shed Ramps: Best for a moderate shed rise
- 39 in length
- 3000 lb capacity
- Aluminum
- Anti-skid traction holes
These 39 in aluminum ramps are stated for 4–13 in rises and have traction holes. They fit buyers who want a longer shed ramp than a short track, while staying within the stated rise range.
Pros
- 39 in ramp length
- Traction holes
- Designed for shed and barn thresholds
Cons
- Check rise range before choosing
- Not intended for high-bed truck loading
The 39 in KOLOTOOL pair is designed for shed and barn thresholds, with a stated rise range of 4–13 in. The aluminum ramps have anti-skid holes and a 3000 lb capacity.
Their longer length compared with short shed tracks may help moderate the approach, but the exact slope depends on your threshold height. Measure the rise and check the product’s stated range before deciding.
KOLOTOOL describes these ramps for riding mowers, ATVs, snow blowers and yard carts. The focus is home and utility access, so they are not intended for high-bed truck loading.
This is a useful middle-length choice if the 55 in ramp is longer than you need and the rise fits the range. Confirm the ramp width and tire alignment before using it.
VNN Aluminum Shed Ramp 2PC: Best for a long narrow approach
- 5 ft long
- 8.5 in wide each
- 1000 lb capacity
- Punched surface
The 5 ft aluminum pair has punched holes and is intended for heights of 11.8–16.8 in. Each ramp is 8.5 in wide, so check the mower’s tire section width and alignment as well as the stated capacity.
Pros
- Long approach for taller thresholds
- Punched surface drains water
- Hardware and pre-drilled holes for attachment
Cons
- 1000 lb capacity
- Tire section should be narrower than 8.5 in
VNN’s aluminum pair is about 5 ft long, with each ramp 8.5 in wide and a stated capacity of 1000 lb. It is intended for heights of 11.8–16.8 in, so it suits a taller threshold than many compact shed ramps.
The punched surface is designed to provide traction and drain water. Pre-drilled holes and hardware are included for installation, and the ramps are described for lawn mowers, lawn tractors, ATVs and snow blowers.
VNN says the tire section should be less than 8.5 in wide. Check your mower tire dimensions and the path between the tires before choosing this narrow-track design.
Choose this pair when your rise is in range and you have enough approach space. If the mower exceeds the capacity or its tires are too wide, select a different style.
KOLOTOOL Aluminum Shed Ramps for Lawn Mower: Best for a broad entrance platform
- 33 in long
- 48 in combined width
- 1500 lb pair capacity
- Cross-pattern holes
This two-piece aluminum set is 48 in wide combined and is intended for a 3.5–7.5 in rise. The broad layout and cross-pattern holes may suit a low shed threshold, as long as the doorway and mower fit.
Pros
- 48 in combined width
- Cross-pattern traction holes
- Hardware included for setup
Cons
- Narrow stated rise range
- Not intended for truck or high-bed trailer loading
This KOLOTOOL set creates a 48 in combined width from two 33 x 24 in pieces. It is designed for a rise of 3.5–7.5 in and has a stated pair capacity of 1500 lb.
The cross-pattern holes are intended to add traction and drain water, and the maker describes a three-screw setup with hardware included. That makes it a candidate for a low shed threshold where a wide platform could help with alignment.
Check that the 33 in length matches your rise and that the ramps fit the doorway. Its stated height range is narrower than some other options here, so it may not suit a taller shed floor.
Choose it for a low entry when you want a broad two-piece ramp. It is intended for sheds and utility access rather than truck loading.
How do you measure a ramp for a shed?
Measure the vertical rise from the ground to the shed floor, then note the clear doorway width and the space in front of the shed. Compare those measurements with each ramp’s stated length, width and recommended height range.
Next, measure the mower’s tire spacing and tire width. For separate tracks, the tires need to land squarely and stay centered while moving up the ramps.
Check the ramp’s capacity against the mower’s weight, including any attachments or cargo you carry during storage. Follow the ramp maker’s instructions for placement, installation and use.
For the full move from yard to storage, read How To Transport Lawn Mower?. If your mower is being moved to another location, our best lawn mower ramps guide covers ramp choices for loading.
What ramp surface helps with traction?
A surface with holes or tread can help tire grip and allow water to drain, but it doesn’t remove the need for careful setup. The picks here include punched steel or aluminum, skid-resistant tread and non-skid board tops.
Keep both ramps aligned and place their upper ends securely at the shed threshold. Avoid using a ramp if it shifts, rocks or sits at an angle that does not match its instructions.
Wet grass, mud and debris can change how tires grip. Clear the approach and ramp surface before moving the mower, and use a slow, steady approach.
Are shed ramps different from truck ramps?
Yes. Shed ramps are often designed around low thresholds, while loading into a high truck bed needs a longer approach and a ramp approved for that use.
Some picks above explicitly limit their intended use to sheds and utility access.
Don’t assume a ramp’s capacity makes it suitable for every height or application. Check its intended use, rise range, capacity and setup instructions before choosing it.
If you’re transporting the mower in a trailer or truck, review How To Tow A Lawn Mower? and How To Strap Down A Lawn Mower? for the next steps.
Can you make a ramp for a shed?
A board-based ramp can be an option if you can build a stable setup that fits the rise and tire spacing. The MaxxHaul kit is designed to turn 2 x 8 in boards into ramps, while the length and placement depend on the boards you select.
Measure first and check the capacity information carefully. For more detail, see How To Make Lawn Mower Ramps? and How To Build A Lawn Mower Ramp?.
Which lawn mower ramp should you choose?
Choose the MaxxHaul kit if you want to make ramps from boards sized for your shed approach. Pick VNN’s 48 in wide set for a broad entry, or the 55 in KOLOTOOL pair if your rise is 6–18 in and you have space for a longer approach.
For separate tracks, compare VEVOR, Stalwart, gardhom and the 39 in KOLOTOOL set by rise, track width and capacity. The right lawn mower ramps for shed entry are the ones that fit your measurements and instructions before the mower moves.
Our top 3 picks at a glance
-
1
-
2
-
3
Frequently asked questions
How do I choose lawn mower ramps for a shed?
Measure the threshold rise, doorway width and distance between the mower’s tires. Choose ramps whose length and width suit those measurements, then check the rated capacity against the mower’s weight.
Look for a traction surface that fits your conditions, and follow the ramp maker’s setup instructions.
Are two narrow ramps or one wide ramp better?
Two narrow ramps can work when each tire tracks cleanly on its own ramp and the pair stays aligned. A wider platform gives more room for tire placement, but it still needs to fit the opening and support the mower’s weight.
Measure track spacing before choosing either style.
How long should a shed ramp be?
Ramp length depends on the rise from ground to shed floor. A longer ramp generally makes a less steep approach for the same rise, but use the ramp’s stated rise range and setup directions to confirm fit.
Measure the rise and available ground space before you choose.
Can I use trailer ramps as shed ramps?
Some trailer ramps are also designed for shed, garage or home use. Check the intended application, rated capacity, ramp width and recommended rise before using a pair at a shed.
A ramp suited to a low shed entrance may not be long enough for loading into a high truck bed.
Should shed ramps be attached permanently?
Follow the instructions for the ramp you choose. Some designs include pre-drilled holes and hardware for attachment, while portable ramps may be positioned as needed.
If you use a removable setup, check that the ramp ends sit securely at the threshold before moving the mower.
